The Great Primochill Typhoon III tests, an absolute SCAM - Page 2 - RRTech...The SOURCE for Extreme Liquid Cooling

**CrazyJoe** · 07-23-2009, 08:00 PM

Quote:

Originally Posted by mcoffey

...
And wait to some poor son of a bitch swaps out his two discrete loops for one combined and his CPU temps jump up 1-2c or even more because a couple of GPU FC blocks are now raising the CPU side along with theres dropping. That'll be some more revolutionary performance I guess

andyc

Ditto.

A true comparison would be to run two loops in parallel by one set of pumps/tops, against the two loops in parallel by the T3. If this really is the "dual loop" answer to all prayers, temps along with flow and pressure need to be measured and compared.

iandh · 07-23-2009, 08:10 PM

I like the performance, even with the lame-o way that the data is presented. The design/concept is impressive.

My gripe about the Tyhpoon is that saying the fill/drain method was designed for convenience is a load of UTTER BULLSHIT. It was designed like that because there isn't any other way to do it.

I don't want to have to tip my heavy ass case forward or backwards. This is especially inconvenient on some cases... a fully loaded MM with multiple loops and stuffed to the gills can approach 100lbs. The whole point of a fillport/drainport is so that you don't have to move your case to service your loop.

I also think that the unit is fugly. The front with the recessed portions and plugs just looks bad, and I can't see it going well with any case meant to be clean looking unless one adds a cover plate.

edit: Also, those claiming this is the best thing since sliced bread need to get their heads checked. It is a superior performer in certain situations, NOT all situations.

**Snyxxx** · 07-23-2009, 08:35 PM

Agree with all of the above. Glad we are over here.

RedRaider · 07-23-2009, 08:41 PM

and here it begins....

This is the "typical" XS active member here...

I am finding it truly hard to believe that someone that is being praised for creating the "Holy Grail" of some D5 Barbie Doll pump top is actually stating he is going to produce a Billet Aluminum Version...

Anodized, plated who the fuck cares. Sad thing is, the person who designed it is American...

This fucking hack jockstrapglides, oh he loves his fucking KoolAid now doesn't he... He is shouting his ignorance to the world...

hey douchebags....TELL ME HOW MY ASS TASTES...

**mcoffey** · 07-23-2009, 08:43 PM

What...it's the product of the year man...don't you realize you can jump the outlet of one leg to the inlet of the other and double your flow rate to 5GPM

..well shit, I'll just order another one run it with jumped legs in between 2 T3 in serial and get 10GPM... Guess I'll have to get a bigger King. A dual T3 setup will blow the top of my 5GPM King Flow Meter clean off I guess

andyc

**Snyxxx** · 07-23-2009, 08:50 PM

Quote:

Originally Posted by mcoffey

What...it's the product of the year man...

andyc

Right up there with cold fusion.

**KaptCrunch** · 07-23-2009, 08:56 PM

here's a tidbit if this flow is double

so has load on motor to meet skinnes magic #'s

RedRaider · 07-23-2009, 08:56 PM

"Product of the Year"... ????

Oh, I beg to differ...

That distinction will definitely go to the hack known as Sniiped_Dick...

Didn't you guys see, he designed the Typhoon III - CPU...

What a cluster fuck this kid is. Now I know why tigers eat their young...

Oh and you saw his totally awesome MySpace page didn't you...

**Snyxxx** · 07-23-2009, 08:58 PM

Quote:

Originally Posted by KaptCrunch

here's a tidbit if this flow is double

so has load on motor to meet skinnes magic #'s

Precisely the main reason given for all the "failures" of the DDC-2.

**mcoffey** · 07-23-2009, 09:01 PM

Quote:

Originally Posted by KaptCrunch

here's a tidbit if this flow is double

so has load on motor to meet skinnes magic #'s

Yeah..and I'll be getting ye old knob polished tonight by Jessica Simpson after she cooks me something to fucking eat

andyc

**Baleful** · 07-23-2009, 09:11 PM

OH FUCK!!! hahahahahah

Quote:

RedRaider · 07-23-2009, 09:12 PM

Hey, I just found the nest XS Admin...

**Baleful** · 07-23-2009, 09:14 PM

If it's Stickied, it must be true!

Fuck, my logic has been wrong all these years!

**KaptCrunch** · 07-23-2009, 09:19 PM

andy

i guess someone has a warehouse full of T3 in china to dump on NA market

XS hype machine to the rescue

snyxxx yip the D5 destined same fate

**mcoffey** · 07-23-2009, 09:19 PM

Quote:

Originally Posted by Baleful

OH FUCK!!! hahahahahah

Well fuck yeah,....and it matches right up with this new revolutionary block/T3 combo design....now this is a classic post of all time here.....

http://www.xtremesystems.org/forums/...4&postcount=56

Quote:

I wondered how long it would be before somebody considered that blocks CAN be customized for more flow rate now. Monsoon, my CPU block design shows a 7 degree drop when hooked up to a T3 vs a regular D5 because it likes the higher flow.

A 7c fucking drop in temps just by adding a T3 to the top.......

you go girl

andyc

**trfnj74** · 07-23-2009, 09:37 PM

Stickied.....

....I can see the IQ of XS members go down as we speak....

RedRaider · 07-23-2009, 09:48 PM

Did I just read BoxGod post that he got a 7* drop in temps due to using a T3 reservoir w/a Barbie Doll pump????

The only thing worse than the blatant out-and-out lies/deceit/schilling posted by BoxGods and Skinnee in this thread, is the fact that not a single Mod/Admin or even the owner of XS has called bullshit yet. There is a VERY OBVIOUS shady deal taking place here my friends. Sad, very fucking sad. This should be an example to all of just how shady XS truly is...

iandh · 07-23-2009, 09:49 PM

**Baleful** · 07-23-2009, 09:52 PM

But it's on *His block design*. Note, he doesn't say what the temps are. For all we know, he's sitting at 50c Idle and 90c Load, on an i7 920.

Either way, it's some shady ass shit, and unfortunately some poor sap is gonna buy into this bullshit.

**mcoffey** · 07-23-2009, 10:06 PM

Yeah..now we got the Typhon, Monsoon and soon to be Buffoon's if they believe all that horse shit

andyc

RedRaider · 07-23-2009, 10:07 PM

I realize this will seem off-topic, but it's not, you'll see...

Here is a thread I started at XS on October 2, 2008. It was to let everyone know that SidewinderComputers would be stocking Aqua-Computer products. I had a strong feeling that ShadyComputers was going out of business and I had convinced Gary to give Aqua-Computers a shot. Not that I ever ask for a little credit or pat on the back, but a shit load of Americans can now buy products they might never have had an opportunity to buy.

What kind of thank you did I receive from XS???

SidewinderComputers....NEW KING of AQUA-COMPUTER (post #44 is one of my favs of the thread )

So for basically announcing that the USA had a REAL company that was going to be distributing Aqua-Computer products (btw, ShadyComputers **sharkacomputers** closed there doors shortly after this thread) I get that bullshit double-speak lecture from this old motherfucker who goes by the handle MovieTheManLover...

And I quote the faggot..."Joel i't time to call a spade a spade and either you are working for these people, are hoping to get something from them by singing their praises or have some unseen agenda that only you know of but it stops tonight."

He is calling me a spade??

It's obvious I'm working for someone??

Well of course I work, unlike your government check collecting degenerate lazy ass. I am the commercial account salesman for a Hot-Mix Asphalt, you dumb fuck hick.

An unseen agenda, huh?? Are you fucking bonkers old man...

Now take the exerpt I quoted and apply it to this fucking BLATANT SHILLED FILLED PSEUDO-REVIEW of the Primochill Typhoon 3...

Do you get my point now??

RedRaider · 07-23-2009, 10:50 PM

OMG...

The disease is spreading around the internet...

I'm not blasting OCN here, just enjoying reading some of what people are posting there...

aww, how cute. Skinnee's little puppy dog followed him to OCN... Isn't that special...

I wonder if I'll receive a $500 fine for this???

**mcoffey** · 07-23-2009, 11:34 PM

Oh this explains the whole phenomena perfectly Vapor..

http://www.xtremesystems.org/forums/...1&postcount=82

it's the 2nd and third harmonics doing it

I guess only really smart people will see the doubled flow rate, because I sure ass hell can't figure it out.

Quote:

t's not halving of pressure drop, it's the harmonic mean divided by 2*sqrt(flowrate through the pump)...in most cases that's closer to thirding the harmonic mean of the pressure drops. In other words, the change in pressure drop when going from the sum of the individual pressure drops to the parallelization of the individual pressure drops is massive. And that is exactly what the "dual loop" bar represents....it's showing that when using the T3 like it's intended, the pump works at higher-than-double the flowrate. That translates into higher flowrates for the two subloops, which are also included in the graph (because, ultimately, flowrate through the components is what drives performance).

Take a D5 PQ curve and then draw (roughly) pressure drop curves that intersect at the serial configuration's GPM (DetroitAC and EK numbers) and then again at the T3's GPM. You'll see what a staggering difference that going parallel (and designing for it) can make in terms of what the pump is doing.

As a pump-top review, it would be unjust to the T3 to not show how the D5 is actually performing when paired with it.

andyc

**KaptCrunch** · 07-23-2009, 11:52 PM

harmonics ONLY count in sound waves

dipshit

**Morae** · 07-24-2009, 01:50 AM

-----

07-23-2009, 08:10 PM	#27
iandh The UPS Phantom Join Date: Dec 2008 Posts: 357	I like the performance, even with the lame-o way that the data is presented. The design/concept is impressive. My gripe about the Tyhpoon is that saying the fill/drain method was designed for convenience is a load of UTTER BULLSHIT. It was designed like that because there isn't any other way to do it. I don't want to have to tip my heavy ass case forward or backwards. This is especially inconvenient on some cases... a fully loaded MM with multiple loops and stuffed to the gills can approach 100lbs. The whole point of a fillport/drainport is so that you don't have to move your case to service your loop. I also think that the unit is fugly. The front with the recessed portions and plugs just looks bad, and I can't see it going well with any case meant to be clean looking unless one adds a cover plate. edit: Also, those claiming this is the best thing since sliced bread need to get their heads checked. It is a superior performer in certain situations, NOT all situations. Last edited by iandh; 07-23-2009 at 08:15 PM.

07-23-2009, 08:35 PM	#28
Snyxxx Pushing Water & Oil Join Date: Dec 2008 Location: Houston, Texas Posts: 1,503	Agree with all of the above. Glad we are over here. __________________ To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

07-23-2009, 08:43 PM	#30
mcoffey Liquid to the Bone Join Date: Nov 2008 Location: American by birth, Southern by the Grace of God. Posts: 2,217	What...it's the product of the year man...don't you realize you can jump the outlet of one leg to the inlet of the other and double your flow rate to 5GPM..well shit, I'll just order another one run it with jumped legs in between 2 T3 in serial and get 10GPM... Guess I'll have to get a bigger King. A dual T3 setup will blow the top of my 5GPM King Flow Meter clean off I guess andyc __________________ Got an issue, get a tissue. We don't do feelings here To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

07-23-2009, 09:14 PM	#38
Baleful Licentia in Rutilus Join Date: Nov 2008 Location: \\|\|/\\|\|/\\|\|/ Posts: 2,997	If it's Stickied, it must be true! Fuck, my logic has been wrong all these years! __________________ Freedom in Red To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Think you have a bad ass machine? To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Join our To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. team and see how your machine stacks up to the rest! Do you like addictions? Do you like spending money on hardware upgrades!? Do you like competition? If you said yes to any of this, you would make a perfect addition to our To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

07-23-2009, 09:37 PM	#41
trfnj74 Does This Taste Funny Join Date: Nov 2008 Location: Templeton MA Posts: 1,328	Stickied.........I can see the IQ of XS members go down as we speak....

07-23-2009, 08:56 PM	#32
KaptCrunch Kapt of Liquid Join Date: Nov 2008 Location: Canada Posts: 767	here's a tidbit if this flow is double so has load on motor to meet skinnes magic #'s

07-23-2009, 09:19 PM	#39
KaptCrunch Kapt of Liquid Join Date: Nov 2008 Location: Canada Posts: 767	andy i guess someone has a warehouse full of T3 in china to dump on NA market XS hype machine to the rescue snyxxx yip the D5 destined same fate

07-23-2009, 09:49 PM	#43
iandh The UPS Phantom Join Date: Dec 2008 Posts: 357

07-23-2009, 09:52 PM	#44
Baleful Licentia in Rutilus Join Date: Nov 2008 Location: \\|\|/\\|\|/\\|\|/ Posts: 2,997	But it's on His block design. Note, he doesn't say what the temps are. For all we know, he's sitting at 50c Idle and 90c Load, on an i7 920. Either way, it's some shady ass shit, and unfortunately some poor sap is gonna buy into this bullshit. __________________ Freedom in Red To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Think you have a bad ass machine? To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Join our To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. team and see how your machine stacks up to the rest! Do you like addictions? Do you like spending money on hardware upgrades!? Do you like competition? If you said yes to any of this, you would make a perfect addition to our To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. ! To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

07-23-2009, 10:06 PM	#45
mcoffey Liquid to the Bone Join Date: Nov 2008 Location: American by birth, Southern by the Grace of God. Posts: 2,217	Yeah..now we got the Typhon, Monsoon and soon to be Buffoon's if they believe all that horse shit andyc __________________ Got an issue, get a tissue. We don't do feelings here To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

07-23-2009, 11:52 PM	#49
KaptCrunch Kapt of Liquid Join Date: Nov 2008 Location: Canada Posts: 767	harmonics ONLY count in sound waves dipshit

07-24-2009, 01:50 AM	#50
Morae Wickman St. Join Date: May 2009 Location: Solitary - Does not play well with others. Posts: 878	----- Last edited by Morae; 08-17-2009 at 12:56 AM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode