The Great Primochill Typhoon III tests, an absolute SCAM - Page 14 - RRTech...The SOURCE for Extreme Liquid Cooling

**p0Pe** · 01-21-2010, 05:18 PM

Quote:

Originally Posted by mcoffey

OK, cool...I'll make you a deal on it too if you want to kill it

andyc

just post it to me, and i will end its life rather quick

i really want to see how bad it fucks up when you do what i suggested

**mcoffey** · 01-21-2010, 05:21 PM

Quote:

Originally Posted by p0Pe

just post it to me, and i will end its life rather quick

i really want to see how bad it fucks up when you do what i suggested

60 USD and it's all yours,

andyc

**KaptCrunch** · 01-21-2010, 09:03 PM

karma does work gayno spin
primochilli is paying through the nose now.

**Marne** · 01-21-2010, 09:18 PM

WAY TO TRY AND COVER YOUR ASS NOW FUCKTARD

i dont work for primoshit...BS. thats the biggest bullshit ass lie i have ever heard. fuck this plastic POS. chinese or american made it still doesnt change the fact that its a BS design. fuck off geno, fuckoff primoshit and fuck off anyone who tries to refuck ppl who already got the dick when they bought this blatant failure of a watercooling product. eat my ass with some hotsauce you wastes of clay. you should be herded into a pen and flicked with 10000 rubber bands every 6 minutes for the rest of your miserable geeky little lives.

**trfnj74** · 01-21-2010, 09:43 PM

Quote:

Originally Posted by Marne_Aeok

herded into a pen and flicked with 10000 rubber bands every 6 minutes for the rest of your miserable geeky little lives.

Dammm, that's sounds like it could hurt.....

**Marne** · 01-21-2010, 09:56 PM

ROFLMAO awesome. ive been sigged

**KaptCrunch** · 01-22-2010, 12:08 PM

ITS RMA TIME @ PRIMOCHILL for T3 or recall for flawed materials

well this says it all

Quote:

Originally Posted by Boxgods,aka geno

All I can suggest is starting an RMA ticket if you haven't already or checking/updating it if you have. Issues like yours are why I am very careful to always mention that I don't actually work for Primo Chill or any of the companies I design products for. That may sound like a bit of a cop out to you but the reality is that once I submit a design and the manufacturing process and product sales cycle begin I am not in the loop. If alterations to the design are made to make it easier or cheaper to produce for example, I have no say. The same for setting or changing the sales price or any other policy the company might have. I am pretty sure (though again not positive) that Primo would not expect you to ship a part back all the way from Spain and would accept a picture or something similar. Just be sure to explain your situation in your trouble ticket, don't assume they know every single detail about you, your purchase, or your particular situation. My experience thus far with Brian and the folks at Primo is that they try to do as much as they can to be helpful and practice good business.

sounds won't cover damaged parts from leaked units only the T3 unit. geno karma does lives

for all those rma's promochill are only saving face for company name, remember me originator

Quote:

Originally Posted by Disclaimer and Limitation of Liability as to Products Sold by Primochill

Primochill.com offers products for computer enthusiasts. Primochill.com is NOT responsible for your CPU or other hardware or bodily harm. By purchasing this product you accept all liabilities involved in using it. Primochill.com is not liable for any consequential damages. Consequential damages are defined as any damage which is a consequence of using this product or our website (data loss; hardware loss; or economic losses like profit loss, customer loss, or time loss). All use of our products is at your own risk. You agree that the sole exclusive maximum liability to Primochill.com arising from any product sold shall be the price of the product ordered. In no event shall Primochill.com, its officers, employees or other representatives be liable for special, indirect, consequential, or punitive damages related to products sold. You agree that Primochill.com, its officers, employees or other representatives shall not be liable for damages arising from the operations, content or use of Primochill.com damages of any kind, including without limitation direct, indirect, compensatory, special, incidental, punitive and consequential damages..

other words they dont stand behind designs/idea's only failed product

**KaptCrunch** · 01-22-2010, 06:45 PM

ha i bet XS cried to mod an made damage control post

Quote:

Originally Posted by mod

To be honest Mate, its like that with PSU"s too. If your PSU Deep-Sixes and Takes out your entire Rig...well they'll replace the PSU, thats it.
As for running a WC setup there are inherient risks in doing so and as such these risks have to be absorbed by the end user occasionally or there would be no suppliers for these products.
Using non-conductive fluids or water replacements are best if you want maximum protection, although performance can suffer.

Because WC is not a Mandatory thing to make a computer run, we are left to its inherient risks.
Just like anything else.

**KaptCrunch** · 01-23-2010, 12:34 PM

look over your shoulders ...karma coming

RedRaider · 02-01-2010, 11:33 AM

This fucking pussy, that goes by the user name 'GENO' (which i will refer to as GAYNO), is a piece of fucking work I tell you...

This pussy feels threatened by an email that tells him karma is a bitch and to look over your shoulder it is coming?? If he would design products that are worth a shit he wouldn't have to fear BAD KARMA, but since he designs shit products and specs shit materials BAD KARMA will find him...

Fucking grow a pair of balls bitch...

As for the

known as DarthHairlip, you have my cell phone number, use it bitch...

This faggot likes to run around in his pajamas and act like some kind of

**Floyd** · 02-01-2010, 11:58 AM

Is BoxGods permabanned now?
He should be if they are still using the same BS rules on XS. I got a permaban because I posted a private message lol

**mcoffey** · 02-01-2010, 12:04 PM

They can have their little love fest over there. Anyone with half a brain realizes the T-3 was a epic failure. They can spin and grin all they want. It doesn't change a thing as far as the quality of design along with, but not exclusive to the manufacturing.

As far as all that "Balls" talk.....child please

andyc

**KaptCrunch** · 02-01-2010, 01:04 PM

Quote:

Originally Posted by mcoffey

They can have their little love fest over there. Anyone with half a brain realizes the T-3 was a epic failure. They can spin and grin all they want. It doesn't change a thing as far as the quality of design along with, but not exclusive to the manufacturing.

As far as all that "Balls" talk.....child please

andyc

the real issue is what xs about, is smoke n mirrors to steal people idea's , ask nikhsub1 why he shot down the concept of t3 when i presented,,,,,good luck trying to find that bit of info for xs spin machine.....mods it truths and lies with thier appointed shills like db

the T-3 was a epic failure due to karma and gene didn't keep his word cos no one likes dishonest people ask his wife why she screens his mail

ballzd33p · 02-01-2010, 01:25 PM

since the beginning, when that little graph by a certain review over there showed flow of both loops as being added together and represented as flow through each loop,

any1 with half a brain could tell there was somethin fishy about this

talladega · 02-01-2010, 01:54 PM

edit: HE should have done delrin................ lol

**KaptCrunch** · 02-01-2010, 02:18 PM

Quote:

Originally Posted by ballzd33p

since the beginning, when that little graph by a certain review over there showed flow of both loops as being added together and represented as flow through each loop,

any1 with half a brain could tell there was somethin fishy about this

yes reviewer asked my opinion before the shilling started

wonder why

**jtf2** · 02-22-2010, 09:25 PM

go check out the t3 thread at xs.
box god and primochill have had a falling out

,

RedRaider · 02-22-2010, 09:40 PM

LMFAO...

Ol Primoshill...errr...former bankrupt VoyuerMods has cone through again.

Congrats Geno, you got what you deserved bitch

Now go out and suck some dicks to make money to pay your bills, you fucking scumbag

**Marne** · 02-22-2010, 10:06 PM

screenshots!

**sidewinder** · 02-23-2010, 02:31 AM

Its not my place to say who is right or wrong, but this is really a fiasco that has formed. I bet they are regretting the three year warranty but I feel bad for the folks that bought one and believed it. I will restate what I said months ago. There are real reasons there are no products from such companies on our website, and there never will be, no matter how many times we are asked to stock them.

**Crow** · 02-23-2010, 05:58 AM

Pause. Wasn't DarthBeavis the one who didn't want to meet Red in person?

**mcoffey** · 02-23-2010, 09:31 AM

And here's the real kicker, and Geno (designer) is just as much to blame as Primo. It's a failed design in it's present state no matter where or how it's made. They bring the mold over here to produce and somehow think it's going to magically start working.

Primo's a POS outfit, but I wouldn't pay Geno for that fucked up piece of shit design either. He's getting just what he deserves for being such a dumb ass, not really understanding LC as a whole, and not listening. Until they totally redo the design, mold, and manufacturing process, that thing will always be a hit or miss POS. Doesn't matter how many times someone RMA's the thing.

What a bunch of dumb asses, but those goofy fuckers over on XS continuously keep blowing smoke up Geno's ass when he's really the cause of all this shit.

andyc

ablatman · 02-23-2010, 10:02 AM

They need to realize that the only reliable way to make parts like that is to mill them out of a larger piece.

talladega · 02-23-2010, 10:35 AM

Quote:

Originally Posted by ablatman

They need to realize that the only reliable way to make parts like that is to mill them out of a larger piece.

Agreed. They wouldn't have had a problem if it was milled or made of Delrin.

If they had done that it would not have been that bad of a reservoir as long as they didnt bribe someone to fake test results.

In other words. If a smart person would have made it, it would have worked out.

RedRaider · 02-23-2010, 10:58 AM

All I can say is again is this:

Geno, when Karma bites back she is like a bitch in heat. I hope you throughly enjoy reaping what you sowed...

Here are some screenshots of how the divorce from PrimoShit went down...

Here Brian from PrimoShit chimes in on the T3 thread...

Here Geno backpedals and defers his lack of effort in helping those that are fucked by buying his poorly designed POS, again blaming it on the injection molding process that he fucking recommended and designed the fucking POS reservoir for...

Here is Geno's first mention that he is having problems with Brian and PrimoShit...

It is apparent to me that PrimoShit isn't paying this fucker anything, for his failed design...

A moment of silence while I begin to cry...

It is now publicized that PrimoShit and Geno have officially 'cut ties'...

Who the fuck cares if you are broke, who the fuck cares that PrimoShit isn't paying you commissions on a failed product design, who the fuck cares about anything in your pathetic existence...

Also, you complained in the second screen shot below about someone threatened you. Then some bullshit about having your wife check your fucking emails for you, are you a ball less faggot bro?? All your little suck dick koolaid guzzling buddies chime in to boost you up, give me a fucking break you pussy...

Then in the first screen shot you are making threats to PrimoShit, isn't that the pot calling the kettle black you bitch.

The icing on the cake, an ADMIN for XS - IFMU, posted a buildlog yesterday, bodly claiming that his build is sponsored by none other than PrimoShit and Moddersmart (both owned by Brian)

01-21-2010, 09:03 PM	#328
KaptCrunch Kapt of Liquid Join Date: Nov 2008 Location: Canada Posts: 767	karma does work gayno spin primochilli is paying through the nose now. __________________ The little man that propelles the water cooling industries an not paid for knowledge

01-21-2010, 09:18 PM	#329
Marne Subaru Pedopig Stares @ U Join Date: Apr 2009 Location: Allentown, PA Posts: 2,566	WAY TO TRY AND COVER YOUR ASS NOW FUCKTARD i dont work for primoshit...BS. thats the biggest bullshit ass lie i have ever heard. fuck this plastic POS. chinese or american made it still doesnt change the fact that its a BS design. fuck off geno, fuckoff primoshit and fuck off anyone who tries to refuck ppl who already got the dick when they bought this blatant failure of a watercooling product. eat my ass with some hotsauce you wastes of clay. you should be herded into a pen and flicked with 10000 rubber bands every 6 minutes for the rest of your miserable geeky little lives. __________________ FUCK YOU FROZEN Q. YOU'RE A THIEVING PLAGUE ON THE WATERCOOLING HOBBY. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Buy My Stuff - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

01-21-2010, 09:56 PM	#331
Marne Subaru Pedopig Stares @ U Join Date: Apr 2009 Location: Allentown, PA Posts: 2,566	ROFLMAO awesome. ive been sigged __________________ FUCK YOU FROZEN Q. YOU'RE A THIEVING PLAGUE ON THE WATERCOOLING HOBBY. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Buy My Stuff - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

01-23-2010, 12:34 PM	#334
KaptCrunch Kapt of Liquid Join Date: Nov 2008 Location: Canada Posts: 767	look over your shoulders ...karma coming __________________ The little man that propelles the water cooling industries an not paid for knowledge

02-01-2010, 11:58 AM	#336
Floyd Mmm Chimichangas Join Date: Apr 2009 Location: Southern MD Posts: 3,501	Is BoxGods permabanned now? He should be if they are still using the same BS rules on XS. I got a permaban because I posted a private message lol __________________ -MURDERED- Q6600 (3.2) 4gig DDR3 Gskill Black Pi Ram (1600 Meg) Asus Striker II NSE (790i) 2X EVGA 275 GTX Watercooling: GTZ, FC-275, BIX 240, BIX 360, 355, XSPC Dual Bay CoolerMaster HAF 932 Corsair HX1000W

02-01-2010, 12:04 PM	#337
mcoffey Liquid to the Bone Join Date: Nov 2008 Location: American by birth, Southern by the Grace of God. Posts: 2,217	They can have their little love fest over there. Anyone with half a brain realizes the T-3 was a epic failure. They can spin and grin all they want. It doesn't change a thing as far as the quality of design along with, but not exclusive to the manufacturing. As far as all that "Balls" talk.....child please andyc __________________ Got an issue, get a tissue. We don't do feelings here To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

02-01-2010, 01:54 PM	#340
talladega Liquid Join Date: Mar 2009 Location: Winkler, MB, Canada Posts: 480	edit: HE should have done delrin................ lol Last edited by talladega; 02-01-2010 at 03:33 PM.

02-22-2010, 09:25 PM	#342
jtf2 Liquid Canuck Join Date: Nov 2008 Location: Saskatoon,Sask.Canada Posts: 441	go check out the t3 thread at xs. box god and primochill have had a falling out,

02-22-2010, 10:06 PM	#344
Marne Subaru Pedopig Stares @ U Join Date: Apr 2009 Location: Allentown, PA Posts: 2,566	screenshots! __________________ FUCK YOU FROZEN Q. YOU'RE A THIEVING PLAGUE ON THE WATERCOOLING HOBBY. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. Buy My Stuff - To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

02-23-2010, 02:31 AM	#345
sidewinder Preferred Vendor Join Date: Nov 2008 Posts: 196	Its not my place to say who is right or wrong, but this is really a fiasco that has formed. I bet they are regretting the three year warranty but I feel bad for the folks that bought one and believed it. I will restate what I said months ago. There are real reasons there are no products from such companies on our website, and there never will be, no matter how many times we are asked to stock them.

02-23-2010, 09:31 AM	#347
mcoffey Liquid to the Bone Join Date: Nov 2008 Location: American by birth, Southern by the Grace of God. Posts: 2,217	And here's the real kicker, and Geno (designer) is just as much to blame as Primo. It's a failed design in it's present state no matter where or how it's made. They bring the mold over here to produce and somehow think it's going to magically start working. Primo's a POS outfit, but I wouldn't pay Geno for that fucked up piece of shit design either. He's getting just what he deserves for being such a dumb ass, not really understanding LC as a whole, and not listening. Until they totally redo the design, mold, and manufacturing process, that thing will always be a hit or miss POS. Doesn't matter how many times someone RMA's the thing. What a bunch of dumb asses, but those goofy fuckers over on XS continuously keep blowing smoke up Geno's ass when he's really the cause of all this shit. andyc __________________ Got an issue, get a tissue. We don't do feelings here To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts. To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

02-23-2010, 10:02 AM	#348
ablatman RRR jr. Join Date: May 2009 Location: Southeastern Pensyltucky Posts: 2,562	They need to realize that the only reliable way to make parts like that is to mill them out of a larger piece.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode