Cosmos S ferrari...

[nicky.82uk]

Next Build...

Cosmos S

Thermaltake W0133RU 1200W Toughpower SLI, Cross-Fire Ready Modular Power Supply

MSI 790FX-GD70

Phenom II X4 955 3.2GHz

2 x OCZ DDR3 PC3-16000/ 2000MHz / Blade Series / Triple Channel Kits / 6GB

GF295

SB X-Fi Titanium Fatal1ty Champion Serie

Watercooling .... Add later :p

[nicky.82uk]

COOLMASTER COSMOS S

http://i306.photobucket.com/albums/nn256/nicky_82/cosmos-s.jpg



2 A.C. Ryan AcrylPanel™ 3mm - 480x480mm UV Red Side doors

http://i306.photobucket.com/albums/nn256/nicky_82/AcrylPanel_UVR_01.jpg



Red Light's inside case'

http://i306.photobucket.com/albums/nn256/nicky_82/sidewindercomputers_2050_12806996.gif

Feser One F1 Cooling Fluid - UV RED - 1 Liter

http://i306.photobucket.com/albums/nn256/nicky_82/sidewindercomputers_2046_24469120.jpg

Blacknoise Noiseblocker Multiframe S-Series M12-S2 51.2 CFM

http://i306.photobucket.com/albums/nn256/nicky_82/sidewindercomputers_2050_35899527.jpg



Feser X-Changer QUAD 480 Extreme Performance Radiator

http://i306.photobucket.com/albums/nn256/nicky_82/sidewindercomputers_2048_10551579.jpg


Feser X-Changer Triple 360 mm Extreme Performance Radiator

http://i306.photobucket.com/albums/nn256/nicky_82/sidewindercomputers_2047_25197688.jpg

aquaero 4.00 USB Fan-Controller, black/red plus black plate

http://i306.photobucket.com/albums/nn256/nicky_82/sidewindercomputers_2049_19347251.jpg

[nicky.82uk]

reserved.

[nicky.82uk]

reserved..

[nicky.82uk]

reserved...

[nicky.82uk]

reserved....

[nicky.82uk]

reserved.....

[nicky.82uk]

reserved......

[Timlander]

I see no where to buy the 955... =*(

[nicky.82uk]

it should be out soon what i keep reading ...

[Langer]

Have you considered finishing your first build before taking on another?

[nicky.82uk]

Yes i have thank you

[Langer]

What's the story with the other build?

[Kayin]

Drop the DFI, get a real AM3 board, you get a lot more settings and ACC...

[nicky.82uk]

i'd say everything should be done by the 10th May i should get my case door back next week then it will go stright into the paint shop take 2 days top then just wait on the aqua stuff coming thow gary i will put my order in for my mips stuff next week do it dhl take 2/3 days heatkiller stuff also can get from gary

[nicky.82uk]

Drop the DFI, get a real AM3 board, you get a lot more settings and ACC...


i heard this one was very good Kayin

[Kayin]

Take a look at the numbers I'm getting out of my MSI AM3 board. I can cruise around in Windows at 3800...

[nicky.82uk]

okay i will take you're advice then cheers i will go for a MSI 790FX-GD70

[Timlander]

I wanna see how the 955 does on that MSI tho.

[p0Pe]

to much money, to less experience IMO. no pun intended, but finish the other one before shooting out new hardware specs.

and why build it in the excactly same case your previous one? at least choose another case. every one can use alot of money and build alot of awsome systems.

concentrate about building a nice loop instead of using your time on surfing hardware :)

[Kayin]

To be fair, the Cosmos S is an incredible case.

Just built one last week, it's a motherfucking monster.

[p0Pe]

i know but building 2 systems in the same case would kinda bore me... only way i would choose that would be so that i knew what i had to work with:P

[nicky.82uk]

i really like cosmos also with the cosmos s i dont really need todo much to it because it has the sports car look i've just go todo the side's then spray it also maybe use all my FUFUFUFUFUFUFUFU gear for the next rig

[nicky.82uk]

so that means i just need to buy rads res pumps tubing coolant lcd fans showders ... i think it would be a smart move in my book

[Grnfinger]

To be fair, the Cosmos S is an incredible case.

Just built one last week, it's a motherfucking monster.

I agree, I bought my Cosmos S for teh Rampage build "Rage Against The Machine"
I was like holy fuck when the sales guy brought the box out, I'm a fairly small guy 5'10" 155lbs, I can literally fit in the box, I felt rather foolish walking out the door with a case almost as big as me.
Fucking awesome case tho

[coolmiester]

Of course its a good case.....i helped design it :smoking:

[nicky.82uk]

very true Coolmister

[ILikeCosmosS]

i would love to see this
even though my build isnt going to be xtreme as yours or coolermiester's i think mine would the most coolest watercooling setup i will throw in there
nick wasnt there another cosmos project you working on?

[nicky.82uk]

yea i'm doing two then thats me done cant afford anymore after both these are done because cost me alot of money

[ILikeCosmosS]

1 is going to cost me 5 grand just because i want so many perks to it

[nicky.82uk]

cool....

[Grnfinger]

Of course its a good case.....i helped design it :smoking:

:D

Your case mods are top shelf, pure addiction.

[nicky.82uk]

you kow this is going to be sick thank god we had coolmiester to help design this wonderful case

[nicky.82uk]

small update everybody on page 1

[just a noob]

don't buy that overpriced pump from hanks house of shit, you can buy all the parts for it, and save yourself some money by getting all the parts from gary at sidewinders

[nicky.82uk]

i like it because goe's with the thame also comes witht the metel top

[just a noob]

i'm not saying don't buy it, i'm just saying you can save yourself some money by buying the parts elsewhere, gary doesn't stock the FUFUFUFUFUFUFUFU top, but he does have the bitspower equivalent: mod kit (http://www.sidewindercomputers.com/bid5mcmodkit.html) top (http://www.sidewindercomputers.com/bid5modtop.html)

[ILikeCosmosS]

the wierd thing is that the bp top has never been tested
and i would go with the ek d5 v2 top

but then you get limited to mounting the d5

[nicky.82uk]

sweet than i will buy from gary i have never seen it on his website before now

[just a noob]

you'll also save yourself a fair bit of money(close to $70) :)

[coolmiester]

You might want to reconsider the XSPC aluminium res also Nicky coz that'll end in tears

[nicky.82uk]

dam thanks man i need to know how the hell did coolmiester did the chrome look on the top of his cosmos

[ILikeCosmosS]

i doing the same paint like on your skull trail because i can't think of good paint jobs for the exterrior

Cm did you put a clear coat on the exterrior parts (plastic parts) to make them shiny?
Since you andonized your mesh and interrior

[Cutless009]

from what Ive read, its possible to use an aluminum res without issue in a loop full of copper as long as its pure distilled water and/or there is no copper distillate in the coolant and theres a decent length of tubing between the res and the nearest source of copper, and since you have to go pump and then to the nearest block, you should be fine in a normal size case.

[ILikeCosmosS]

the xspc res looks wierd i dont see how you got attacted to it
i perfer something like a simple EK multioption

[nicky.82uk]

from what Ive read, its possible to use an aluminum res without issue in a loop full of copper as long as its pure distilled water and/or there is no copper distillate in the coolant and theres a decent length of tubing between the res and the nearest source of copper, and since you have to go pump and then to the nearest block, you should be fine in a normal size case.


Thank you so much :crack:

[Baleful]

Change the resovior, that XSPC is garbage. Sorry, there's no nice way to put that.
Aluminum is Garbage


Aluminum in the hands of the inexperienced, causes Galvanic Corrosion (http://en.wikipedia.org/wiki/Galvanic_corrosion).

[ILikeCosmosS]

the rads arent that bad though xspc is garbage but not everything is garbage the xspc rx rads for cheaper then feser and give great performance

[RedRaider]

Get that FUCKING ALUMINUM shit out of here....

ALUMINUM + COPPER = FAILURE

ALUMINUM makes me :puke1:

[nicky.82uk]

the xspc res looks wierd i dont see how you got attacted to it
i perfer something like a simple EK multioption


because i like red and i dont mean redraider that sounds so gay lol
also looks very nice with the thame what i'm doing

[ILikeCosmosS]

hmm red coolant
i doing a red/blue/black theme internally + external there is black+chrome+ the fans make the case look really cool thats my goal
red coolant is better then the fugly xspc res
hmm red tubing what about the EK waterfall res? those things are NICE

[nicky.82uk]

nope sorry looks like a peace of shit i'm trying to get a sports car look

[coolmiester]

from what Ive read, its possible to use an aluminum res without issue in a loop full of copper as long as its pure distilled water and/or there is no copper distillate in the coolant and theres a decent length of tubing between the res and the nearest source of copper, and since you have to go pump and then to the nearest block, you should be fine in a normal size case.

Dunno where you read that Cutless but that there is a forum myth :crack:

Liquid circulates the entire loop within seconds so you think aluminium isn't going to migrate to copper just because you got a couple of feet of hose in the way??

[Baleful]

the rads arent that bad though xspc is garbage but not everything is garbage the xspc rx rads for cheaper then feser and give great performance

Are you serious??

Take a look here (http://www.realredraider.com/vbulletin/showpost.php?p=12637&postcount=97)

And here (http://www.realredraider.com/vbulletin/showpost.php?p=13338&postcount=108)

The rads may have decent performance, but horrible QC.

[Baleful]

Dunno where you read that Cutless but that there is a forum myth :crack:

Liquid circulates the entire loop within seconds so you think aluminium isn't going to migrate to copper just because you got a couple of feet of hose in the way??

I've seen people post that as well, but I wouldn't trust it myself. Hell, someone posted a link somewhere here, using a Chevy aluminum truck radiator for their loop, said it was fine.

I think aluminum can be worked if it's in the hands of a very experienced/knowledgeable person. Not to be a dick, but we have neither in nicky's case.

I dunno, sometimes you gotta crash and burn before you learn, but it kills me to even think about all this hardware getting killed.

[nicky.82uk]

sould like i'm going for a Aqua one then

[nicky.82uk]

what about this one for both red EK Waterblocks EK-Multioption RES 250 rev.2

[coolmiester]

All the gear and no idea................springs to mind Bale :D

Seriously though i can dig photos out from way back when i was experimenting with mixed metals and its a proper eye opener.

.....maybe i should start a thread

[nicky.82uk]

http://i306.photobucket.com/albums/nn256/nicky_82/sidewindercomputers_2048_11425738.jpg

[nicky.82uk]

All the gear and no idea................springs to mind Bale :D

Seriously though i can dig photos out from way back when i was experimenting with mixed metals and its a proper eye opener.

.....maybe i should start a thread

why dont you it will help everybody whose new.

[Cutless009]

All the gear and no idea................springs to mind Bale :D

Seriously though i can dig photos out from way back when i was experimenting with mixed metals and its a proper eye opener.

.....maybe i should start a thread

if I had the parts I'd love to run two identical loops, one with an aluminum res and ~5 feet of tube between res and the first block, and a second with an acrylic/pom res, and see if theres any difference between the blocks after running for say, a month, or two.

Id love to see once and for all if its possible to run aluminum res's without problems.

[coolmiester]

Back in the day i thought it was a good idea to make some aluminium tops for some of the early DD stuff

Yeah they looked kinda cool but a couple of months later :eek:

http://www.coolercases.co.uk/images/alu_tops/m3_4.jpg

http://www.coolercases.co.uk/images/alu_tops/m3_1.jpg

[nicky.82uk]

dam no thanks i will use this EK Waterblocks EK-Multioption RES 250 rev.2 should be okay ..

[Baleful]

Oh damn, that's hot. Looks like RR's man juice all dried up on those blocks.... you sure they didn't come from Texas, CM? :ROTF:

[Cutless009]

yes but theres a difference between copper and aluminum TOUCHING and interacting with the fluid at the same time, and copper and aluminum separated by several feet of tube. Thats what I want to test personally.

[nicky.82uk]

okay ..........

[ILikeCosmosS]

Baleful thx for the info i am not in the mood to get a rad that i have to paint and tap holes into
i think i will spend the extra money for the feser rads which are 100% guarantee of not having crap like xspc

[RedRaider]

Here is a D-TEK AMD CPU block that I bought off of ebay last year. I have kinda got an obsession with collecting waterblocks now...:crack:

Enjoy the aluminum / Copper love in this pic...;)

http://farm4.static.flickr.com/3102/3195771894_49d9555256_o.jpg

[nicky.82uk]

what the fuck rad thats bad also

[RedRaider]

http://farm4.static.flickr.com/3477/3179559151_8b4a8b7c9b_o.jpg

[nicky.82uk]

yes i understand now thank you
so what res should i go for i dont want the same as the other case i'm using Aqua for the lambo

http://www.sidewindercomputers.com

[coolmiester]

yes but theres a difference between copper and aluminum TOUCHING and interacting with the fluid at the same time, and copper and aluminum separated by several feet of tube. Thats what I want to test personally.

Cutless, its got fuck all to do with mixed metals touching each other bud........please go read up on galvanic corrosion and you will soon begin to realise its nowhere near as simple as you would like it to be.

Maybe even spend a few years putting it all into practice and documenting your findings and all of a sudden, you'll want to blow the top of that guy with the chevy aluminium rad's nut off for being such a lunatic :D

[RedRaider]

I have two of these...EK Waterblocks EK-Multioption RES 400 rev.2 (http://www.sidewindercomputers.com/ekwaekres400.html)

You'll probably want the smaller size variants though...

[Cutless009]

Oh I've done quite a bit of research on the subject, my grandfather is a chemist. I'd just be interested to put his theories to the test and see what happens. Cheap copper block, cheap alu res, and a pump, and voila.

[Snyxxx]

yes but theres a difference between copper and aluminum TOUCHING and interacting with the fluid at the same time, and copper and aluminum separated by several feet of tube. Thats what I want to test personally.

I am not sure about that Cutless. I think the either the copper or aluminum ions are inside the water travelling through the circuit. The aluminum cannot hide.

I am hoping rubidium will help shed some technical light on this.

Actually, I am tired of this subject as it always comes up now and then. Just don't mix!

[nicky.82uk]

I have two of these...EK Waterblocks EK-Multioption RES 400 rev.2 (http://www.sidewindercomputers.com/ekwaekres400.html)

You'll probably want the smaller size variants though...


thank red

http://i306.photobucket.com/albums/nn256/nicky_82/steptoe2.jpg

[RedRaider]

Nicky....

I like these new ones from Alphacool...:crack:

Alphacool HF 38 Cape Cyclone 150 AGB (http://www.realredraider.com/vbulletin/showpost.php?p=31685&postcount=23)


Alphacool HF 38 Cape Cyclone 150 AGB (http://www.realredraider.com/vbulletin/showpost.php?p=32558&postcount=27)


Alphacool HF 38 Cape Cyclone 150 AGB (http://www.alphacool.com/shop/Ausgleichsbehaelter/Ausgleichsbehaelter/Alphacool-HF-38-Cape-Cyclone-150--5911.html)

[Cutless009]

I am not sure about that Cutless. I think the either the copper or aluminum ions are inside the water travelling through the circuit. The aluminum cannot hide.

I am hoping rubidium will help shed some technical light on this.

Actually, I am tired of this subject as it always comes up now and then. Just don't mix!

exactly thats why I want to test it once and for all just to see and have hardcore results.

[nicky.82uk]

Nicky....

I like these new ones from Alphacool...:crack:

Alphacool HF 38 Cape Cyclone 150 AGB (http://www.realredraider.com/vbulletin/showpost.php?p=31685&postcount=23)


Alphacool HF 38 Cape Cyclone 150 AGB (http://www.realredraider.com/vbulletin/showpost.php?p=32558&postcount=27)


Alphacool HF 38 Cape Cyclone 150 AGB (http://www.alphacool.com/shop/Ausgleichsbehaelter/Ausgleichsbehaelter/Alphacool-HF-38-Cape-Cyclone-150--5911.html)


nice you going to be doing any group ordering?

http://i306.photobucket.com/albums/nn256/nicky_82/steptoe2.jpg

[RedRaider]

not at this time...

[mcoffey]

Change the resovior, that XSPC is garbage. Sorry, there's no nice way to put that.
Aluminum is Garbage


Aluminum in the hands of the inexperienced, causes Galvanic Corrosion (http://en.wikipedia.org/wiki/Galvanic_corrosion).

Absolutely it is, that's why it's nasty ass has been stuck in a drawer for the last two years. That was my first rookie mistake and last with mixed metals. It looks great (IMO) and the concept is good from a passive cooling standpoint, but it's AL. And that's all that needs to be said if anyone has half a clue about well designed and implemented LC loops.

But here's the bottom line, I'm not here to convince someone not do to do stupid shit. If someone wants to go against commonly accepted practices for doing a LC loop, then good fucking luck to um.

Plenty of other forums out there drinking that Koolaid, and we don't play that bullshit here on R3.

andyc

[ILikeCosmosS]

if you werent going to get a tube res get the EK WATERFALL RES
they look so good
i cant get it because i lack the bays

[nicky.82uk]

lol lol spot on

[nicky.82uk]

right ....

[Metasheep]

exactly thats why I want to test it once and for all just to see and have hardcore results.
Google is your friend. A quick search turned up this article (http://www.dansdata.com/burning.htm) from Dan's Data from 2000. A quote from the important part:

The copper corrodes a little, as copper in water or air always will. This is not normally a big deal, because a thin copper oxide layer forms and protects the rest of the metal. But in the process, some copper ions go into solution and make their way around, thanks to the pump, to the aluminium water block. They precipitate onto the water block surface as teeny little metallic copper particles.
And then plain old galvanic corrosion can happen, as the copper and aluminium are in physical, and thus electrical, contact, and both immersed in the electrolyte. The dreck you end up with is mainly aluminium oxide, with its greenish colour donated by a light lacing of copper oxide. Tah-dah.

[nicky.82uk]

Google is your friend. A quick search turned up this article (http://www.dansdata.com/burning.htm) from Dan's Data from 2000. A quote from the important part:


yea i will do thanks guys

[nicky.82uk]

fuck meeeeeeee http://www.dansdata.com/images/burn/brown400.jpg

[mcoffey]

No shittttttttttt..did you think we were making the "don't do mixed metals" stuff up?

And here's the real deal...there's no need to do mixed metals, there's plenty of incredible copper/brass/nickel plated parts out there. And just about any, if not every part outperforms the AL stuff.

andyc

[Langer]

Copper for the win; for all the wins. :)

[nicky.82uk]

thanks guy's

[nicky.82uk]

Right everybody like I said before I was going to use all my FUFUFUFUFUFUFUFU stuff for my AMD build
Correct so I have a choose now I know you’re not going to be happy but that’s life get over it
It’s not like I can sell this stuff just about sold the CPU to some poor soul feel sorry for who get its it next haha
Right now I can sell maybe one FUFUFUFUFUFUFUFU gpu block then that will pay for the MIPS gear sorted with abit of money but not much
Then I have to buy one heatkiller gpu block from Gary also aqua order plus paint job / sidedoors ,shipping. so much to spend at the end of this month
so this means I can only run 1gpu errrrrrrrr what todo what todo hmmmmmm but this mean my i7 done then... is this the right move i'm doing

[Septim]

well you could simply water your cpu first... sell save and recoup some budget, the buy gpu block some other time...

[nicky.82uk]

well just order my cpu and mb

[nicky.82uk]

Just order a ATI RADEON HD 4890 HD4890 1GB GDDR5 PCI-E 2.0

[Worthy]

Just order a ATI RADEON HD 4890 HD4890 1GB GDDR5 PCI-E 2.0


Good, I think you'll be happy with it.
Plus the nice thing is that if something newer comes out, fuck it. Just add another of what you have and the performance increase is huge.

I think you made a good choice.

[nicky.82uk]

thank man

[p0Pe]

i know this has been asked a few times, but just to be straight.
why do you want another rig?

[nicky.82uk]

because i want another rig

[p0Pe]

wow... that was the most uninteligent answer i had all day:)
streetcredit -1

[Silverion77]

wow... that was the most uninteligent answer i had all day:)
streetcredit -1

AHAHAHA :rofl:

[nicky.82uk]

lol....

[nicky.82uk]

well guess what came in the post this morning

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7478.jpg

[p0Pe]

dude... Your so fucking awesome:crack:

[nicky.82uk]

lol cheers mate

[acadiancrusader]

curious, why the msi mobo?

[nicky.82uk]

Because so dam sexy motherboard


http://i306.photobucket.com/albums/nn256/nicky_82/msi.jpg

[knightmaric]

The msi mobo is by far the nicest am3 mobo out so far.
I'd buy it =]

[nicky.82uk]

so true about that when i seen it .. it was love at first site

[Cutless009]

yep, its sexy alright, too bad its for an inferior processor :down:

[Worthy]

That's supposed to be a pretty good chip actually cutless.

[funkysnair]

yep, its sexy alright, too bad its for an inferior processor :down:

yeh its supposed to be very good, if im not correct didnt someone set a record for overclocking using that cpu?

[nicky.82uk]

yea it was 6.0 ghz

[p0Pe]

6.5 ghz on liquid helium:) max temp of -232c as far as i remember. it was also the first cpu to cold boot on thoose temps. (-270c)

do you plan on reaching the same nicky? whats your thoughts of the unlocked multiplier? or do you just stricktly plan on raising the fsb? whats you goals on the oc. side?

:edit

http://www.youtube.com/watch?v=wB0JodKgZ0A

this is on the 940 though as far as i can see

[nicky.82uk]

more like 7127MHz

http://www.nordichardware.com/news,9189.html

[Worthy]

So nicky, what parts are we waiting on. Are we going to see some assembly soon?

[nicky.82uk]

i'm in no rush for this one because my other one will be done very soon i will do it by bit because work is very slow

[p0Pe]

my guess is thats he´s waiting for some wires that a dude named "stormy" promised him to make xDDD

[nicky.82uk]

no not waiting for wires waiting for my case and new rad stand then just waiting on gary then one project done

[scraps]

6.5 ghz on liquid helium:) max temp of -232c as far as i remember. it was also the first cpu to cold boot on thoose temps. (-270c)

do you plan on reaching the same nicky? whats your thoughts of the unlocked multiplier? or do you just stricktly plan on raising the fsb? whats you goals on the oc. side?

:edit

http://www.youtube.com/watch?v=wB0JodKgZ0A

this is on the 940 though as far as i can see

3 kelvin GOD DAMN I didn't know electricity would still move at this temperature, let alone run a chip LOL

[nicky.82uk]

lol yea

[p0Pe]

3 kelvin GOD DAMN I didn't know electricity would still move at this temperature, let alone run a chip LOL

yeah thats an amazing cold start!

[Worthy]

3 kelvin GOD DAMN I didn't know electricity would still move at this temperature, let alone run a chip LOL

Meanwhile people with their head in "intel cloud city" are unaware AMD is ready to pounce right around the next corner. At this point, a quadcore from either one is a fine choice in my mind.

You can focus on 3dmarks, or you can fire up a game and not notice a difference between the two and save a few bucks.

All they need to do for the AMD chips now is make some upscale boards like the classified and rampage 2 extreme for it.

[nicky.82uk]

I’ve always used AMD but when u heard about i7 I change my mind but now I have the best of both worlds can’t get any better and what I have already got

[nicky.82uk]

preview for what i have in mind for this one


http://www.youtube.com/watch?v=ZxcClGptmj0

[Cutless009]

OK......

1: why would you choose a BLUE motherboard for a RED ferrari build?
2: Even if it is a flipout monitor, why would you put a POS made-in-china TT POS anywhere near your computer, much less in it. Thats like putting a civic engine in a ferrari shell.
3. Why the 6 minutes of epic fail nothing at the end of your "movie"?


Im kinda disappointed really, you could make this build so much better with just a few more well-thought-out ideas.

[MKmods]

well up to 2:50 or so that was excellent.
(you can be my official youtube vid maker, beginning engine sounds brought a tear to my eye)

[nicky.82uk]

you will not see the motherboard once it case door over it

the monitor nice i like it also why the vid 6 mins long because this is preview not all done

yet by the the time its all done then it will be 6 mins long

[nicky.82uk]

here the moniter http://www.bit-tech.net/hardware/monitors/2006/01/13/acer_ferrari_f20_lcd_monitor/1

[Worthy]

I like that monitor. I wish it came in larger sizes.

[nicky.82uk]

i know same here but 20inch still okay for me

[p0Pe]

can you explain why it was so hard to only render the first 2.5 min of the 1337 vid of parts that almost blew my mind?

and are we ever going to see that done case of yours?

i am kinda curious nicky... what are you typing from atm?

[ballz0r]

lol.. wrong thread

[acadiancrusader]

i know same here but 20inch still okay for me

that's what she said!

[nicky.82uk]

Coolermaster Cosmos S

Coolermaster V10

2x Sapphire HD4890

Pioneer DVR-217BK 20X / SATA / Black

Seagate ST3500418AS Barracuda 7200.11 SATA 3Gb/s 500 GB

2 x CORSAIR 2GB (2 x 1GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Dual Channel Kit Desktop Memory

Acer F-22BID

Logitech Cordless Desktop Wave Pro

SB X-Fi Titanium Fatal1ty Champion Serie

just doing some priceing up wonder what siz psu i'm going to need for this i know this i will not be doing watercooling ... any ideas please thank you .... reason why not watercooling cost to much on the last one and to much time

[nicky.82uk]

sidedoor design
http://i306.photobucket.com/albums/nn256/nicky_82/Ferrari20Horse20Badge20Emblem.jpg
cosmos s case top design
http://i306.photobucket.com/albums/nn256/nicky_82/5.jpg
http://i306.photobucket.com/albums/nn256/nicky_82/FerNose-91.jpg

this will go at the bottom of the case
http://i306.photobucket.com/albums/nn256/nicky_82/3.jpg
http://i306.photobucket.com/albums/nn256/nicky_82/Ferscript85.jpg

Rosso Corsa Red Paint
http://i306.photobucket.com/albums/nn256/nicky_82/brad_silverstone_lianli_ferrari_red.jpg

[nicky.82uk]

I can’t believe I cannot get a Cosmos s I’ve just been to a load of shops and get the same answers
Chininter.co.th have discontinued them what a bummer
http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7500.jpg

[elite.ire]

sux about the cosmos s, and if you have to get one imported shippings going to be killer...

[p0Pe]

are you basicly just going to do the same as with your farari build:(? just in red?

[nicky.82uk]

yup just playing now with the AMD Its set up man fuck me this is flying like

[nicky.82uk]

just installed the gpu card nice very nice also this v10 fuck me when it kicks in it's like something taking off good choose what i want for 100%

[nicky.82uk]

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7502.jpg

[nicky.82uk]

well i've looked high and low still looking for a cosmos s but have some good news i've emailed ban leong aka Ban Leong Chin Inter Co,.Ltd there like the main coolermaster agent for asia the guy who the agant for Thailand away i'm guessing he at Computex2009 and he needs to look at getting me one so i've got to wait a week wtf i want want want a coolermaster cosmos s i really want want a coolermaster case lol

[funkysnair]

is this what your looking 4?

http://www.overclockers.co.uk/showproduct.php?prodid=CA-156-CM&groupid=701&catid=7&subcat=29

i was thinking of buying one of these to replace my antec1200

[nicky.82uk]

thats it yeaaaa

[funkysnair]

frozencpu will post to your country if you email them first, not sure on the prices or anything judt trying to help you out

http://www.frozencpu.com/products/7195/cst-685/Cooler_Master_COSMOS_S_Aluminum_Alloy_Full_Tower_C hassis_RC-1100-KKN1-GP.html

[nicky.82uk]

when i last looked with coolermaster the shipping was the same price as the case fuck that shit

[nicky.82uk]

well good news they are going todo a special order for me and also give me a special prices because they love my work nice

[nicky.82uk]

well well i have a CoolerMaster Cosmos S coming next tuesday yeaaa

[nicky.82uk]

today or tomorrow i should get the Cosmos S and now just looking for a bios Fintek F71889F chip taken along time this also msi are son of a bitch to sort out RMA

[nicky.82uk]

just trying to get my hands on one these for this

UCP 700 Watt ATX12V / 80 PLUS SILVER Certified Power Supply

http://cmstore.coolermaster-usa.com/product_info.php?cPath=18_32_40&products_id=244

[Silverion77]

y??

Just because its Coolermaster? Theres many more choices for that price that are good/better. I mean, its done decent in reviews, but ive never herad of AcBel Polytech (OEM) being in any other psu...

[coolmiester]

I think he wants the 5 nesseccary CM items needed to enter the Coolermaster 2009 modding contest (http://www.coolermaster-usa.com/microsite/mod_contest09/)

[elite.ire]

woulda thought he already had five with the case, cpu cooler, and must be atleast 3 coolermaster fans in the cosmos s ?

[nicky.82uk]

hmm

5,Cooler Master High Performance 120MM R4 Series RED LED Case Fan

[nicky.82uk]

just talking to my thai friend no problem sorting a new chip for the bios save me around 200 bucks in shipping cost just looking how i can strip all the black of the slots at the front of the cosmos s then put red on them i think i better with plane striper right ... ?

[nicky.82uk]

So just looking how we could do this one is cut out the horse then lettering put it to the mesh grill then just need to worrie about the frame what do you think good idea or what ...


http://i306.photobucket.com/albums/nn256/nicky_82/TorqueOmata3387.jpg

[nicky.82uk]

guess what i've got

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7594.jpg

[Floyd]

Need better close up shots!
Looks like a case panel, fans, maybe a PSU box, a case and some funny looking plugs on that power stip ;)

[elite.ire]

hes got a tiled floor :o, i guess correcty ?

[nicky.82uk]

well i got today a new door for the cosmos 1000, cosmos s sweat bands coolermaster cup they were free i like free stuff also that cpu fan i won what i'm using now psu also using now and thats a Silent Pro M 600W


http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7600.jpg

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7596.jpg

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7598.jpg

only have 2 must wait for the others next month
http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7597.jpg

http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7595.jpg

[Floyd]

Very sexy case but its just too big for me.

[nicky.82uk]

i love this case man so so fucking peaceful in this room now

[nicky.82uk]

for the top of the cosmos s where the grill is i'm going to paint it red white and green as you can see from the picture also use this ferrari emblem ... :D
http://i306.photobucket.com/albums/nn256/nicky_82/DSCF7601.jpg
http://i306.photobucket.com/albums/nn256/nicky_82/Nnose.jpg


well just looking into the design the horse and lettering should be okay its just the top of the frame what maybe a problem as its three tones to the design as you can see from the picture

http://i306.photobucket.com/albums/nn256/nicky_82/165133120_b38c31308a.jpg

[nicky.82uk]

as for the front of the cosmos s i'm going to be using a ferrari horse emblem same as the one in the picture ... :)
http://i306.photobucket.com/albums/nn256/nicky_82/ferrari_horse_2.jpg
http://i306.photobucket.com/albums/nn256/nicky_82/CosmosS_Front.jpg

i'm not sure where on the front of the cosmos s it will go but it should look nice once its done ... fringers cross

[nicky.82uk]

http://i306.photobucket.com/albums/nn256/nicky_82/3D_logo_copy_bigger.gif

[Worthy]

Hey, whatever ya say there, sexy sandals. :ROTF:

I have those fans too. Let me know how ya like them.
I think they're pretty damned good actually.

[nicky.82uk]

lol yea

the fans are nice i was very suprise

[nicky.82uk]

well here comes a epic case i think you lot are going to like this

http://i306.photobucket.com/albums/nn256/nicky_82/Capture_horse.jpg

[nicky.82uk]

well my cpu is back and repaird i'm using it as i'm doing this .. so now we need to overclock this i'm so thinking about putting the cpu on water and try and get 5,0 ghz i've got all the stuff just need a pump and a rad ...

ps Worthy info for overclock later for me Phenom II X4 955 MSI 790FX-GD70 Sapphire HD4890 Seagate 160GB 4 /Corsair Microsystems Corsair XMS3 CoolerMaster Silent Pro M 600W CoolerMaster v10