BP - Rampage II Extreme

[RedRaider]

Here you go guy's.....

Another RedRaider Technology exclusive...:king:



http://farm4.static.flickr.com/3128/3112914721_da2785c767_o.jpg

http://farm4.static.flickr.com/3246/3113745218_4922034069_o.jpg

http://farm4.static.flickr.com/3118/3115920620_9569246d5f_o.jpg

http://farm4.static.flickr.com/3227/3115920596_0c3222f7da_o.jpg

http://farm4.static.flickr.com/3248/3137872499_4c2df3b66d_o.jpg

http://farm4.static.flickr.com/3246/3138693864_eb915b233d_o.jpg


Vincent, keep cranking out the TOP NOTCH goods...:2up:

[Fitseries3]

holy crap!

if i was actually going to stick with this board id get that for sure.

im planning on getting the P6T6 Revolution soon though... if i can find one.

[Sniper]

Very nice indeed!

[Overclocking101]

wow very bad ass

[Xilikon]

Great, it's the first block to cool all the hot components of the RIIE ;)

[Sniper]

Wonder if that center section can be done in Red?

[bp-Vincent]

Wonder if that center section can be done in Red?

Sure...Just change color of LED....

[RedRaider]

RED ....... FTW

[Big_Daddy]

Is it wide enough to accept compression fittings? :)


That looks kick ass. good job Vincent.

[evil-98]

oh, ok i get it the center is acrylic looks nice BP

[bp-Vincent]

Is it wide enough to accept compression fittings? :)


That looks kick ass. good job Vincent.


Sure...All of our design can fit the big one...CC5...

[Big_Daddy]

Vincent, I was j/k. what is that 5" of course it will fit comp's

[cian1500ww]

I wish I could afford that board and an i7 :(

[RedRaider]

Vincent, any plans for FoxConn BloodRage blocks ???

[Sniper]

Sure...Just change color of LED....

Ah nice that's an awesome idea!

[bp-Vincent]

Vincent, I was j/k. what is that 5" of course it will fit comp's

CC5 is for Tube ID 1/2" OD 3/4"

Vincent, any plans for FoxConn BloodRage blocks ???

Current we are check Gigabyte and MSI X58...Foxconn...I will check if I can buy them in Taiwan

[RedRaider]

CC5 is for Tube ID 1/2" OD 3/4"



Current we are check Gigabyte and MSI X58...Foxconn...I will check if I can buy them in Taiwan

Thanks Vincent...

FYI, the FoxConn BloodRage isn't released yet...

[zlojack]

That's a nice block, for sure.

[bp-Vincent]

Thanks Vincent...

FYI, the FoxConn BloodRage isn't released yet...


DFI also not released..but we try to contact direct from them...Foxconn..I will check can I reach them as well?

[CrazyJoe]

I just get registered here today ... and I'm drooling over the first two posts I read.

Awesome work going on here folks ! :up:

Count me in on one of those !

[dingdong555]

Awesome, too bad the board over here is $800AUD lol.

[RedRaider]

Another RedRaider Technology Exclusive....

A little RED love from Vincent...:woot:


http://farm4.static.flickr.com/3118/3115920620_9569246d5f_o.jpg


http://farm4.static.flickr.com/3227/3115920596_0c3222f7da_o.jpg

[Baleful]

Very nice indeed. Keep up the good work Vincent!

[bianco]

wow... just when i decided not to wc my r2e...
that red just looks just too awesome to resist
nice work vincent
:coolup:

[RedRaider]

Vincent likes RED...:king:

[ballzd33p]

nice, just what i was looking for.
any release date yet?

[bp-Vincent]

nice, just what i was looking for.
any release date yet?

Release date not have firm one..

Will be announced again after 2nd week in Jan 2009

[ND40oz]

holy crap!

if i was actually going to stick with this board id get that for sure.

im planning on getting the P6T6 Revolution soon though... if i can find one.

http://www.zipzoomfly.com/jsp/ProductDetail.jsp?ProductCode=10009852&prodlist=froogle

The way that block is designed, it doesn't look like it will work on the revolution though due to the first slot being a full length x16 PCIe.

Actually, looking at the boards more closely, it looks like all the P6Ts use slightly different layouts of the components.

[Xilikon]

Welcome to the forum, ND40oz ;)

About the block fitting the P6T6, we need to see shots of naked P6T and P6T6 to confirm it works but I do believe it will fit as long as the NB/SB is still in the same positions.

[ND40oz]

Welcome to the forum, ND40oz ;)

About the block fitting the P6T6, we need to see shots of naked P6T and P6T6 to confirm it works but I do believe it will fit as long as the NB/SB is still in the same positions.

Why thank you :o

Yeah, I've been looking on ZZF at the 6 different Asus x58 boards, and they all seem to have the nb/sb and other components in slightly different places.

The P6T6 WS Revolution has the extra nf200 chip, so it's under there somewhere.

The P6T WS Professional has a PCI-X chip somewhere on it, I think it's sitting at the back of the first PCI-X slot.

And then regular P6T and P6T Deluxe have completely different layouts of the SATA and EIDE ports and it's hard to tell if the components match up.

[RedRaider]

:welcome2: ND40oz....

[NAekuh]

very nice indeed...

vincent looks like you guys finally understood what i ment by inlet one side outlet other.

This should be a lot better then your other freezers..

[The[R]eaper]

Wow that block looks great.. makes me want to spend lots o' money and get some i7 damn

[RedRaider]

eaper;6072']Wow that block looks great.. makes me want to spend lots o' money and get some i7 damn

spending :money: :money: :money: on new watercooling prOn is delightful...:D

[The[R]eaper]

i know i just spent a bunch on a build ill be working on soon.. so... so ... hard to resist:D

[bp-Vincent]

very nice indeed...

vincent looks like you guys finally understood what i ment by inlet one side outlet other.

This should be a lot better then your other freezers..

Hi Naekuh,


The blocks will depend on the layout of MOBO....If possible, we will make the channel as bigger as we can.

[Septim]

that is good to hear, sometime i wish for standardized placement of capacitors and NB and SB, so that 1 freezer can fit diff mobos...

red is good color...

[bianco]

hi vincent,

i hope the nb part of this block would allow a long soundcard to be mounted with no problems. damn r2e stock nb heatsink assembly blocks anything longer than the supremefx soundcard.

http://i253.photobucket.com/albums/hh73/bianco26/Project%20Resurrection/07_ETC/xonar%20on%20r2e/EOS_2008_12_17_00412.jpg

http://i253.photobucket.com/albums/hh73/bianco26/Project%20Resurrection/07_ETC/xonar%20on%20r2e/EOS_2008_12_17_00413.jpg

[bp-Vincent]

Hi Bianco...

Here is our Block's placement for RIIE...It's ok for long soundcard.

[bianco]

thanks Vincent.
looking forward to the r2e waterblocks.

i'll surely come running to you if my xonar doesn't fit in the first pcie slot.
:D

[RedRaider]

Thanks Vincent...:up:

[Ricey]

I assume that the center LEDs can be disabled... hopefully :)

Well done. This is on my "must buy" list.

[bp-Vincent]

I assume that the center LEDs can be disabled... hopefully :)

Well done. This is on my "must buy" list.

Sure...It can be disable ...and can change color very easy..

Here is the final design on our Rampage II Extreme block set

[RedRaider]

Vincent, I must say that you are pushing this "hobby" of ours to untold peaks.

Major KUDOS.:2up:

[Sacpaduce]

Looks good but can't see the VTT card in drawings and block looks like a rough draft.

[breezyjr]

MUST......


HAVE......


ONE.....

NOW!
:eek::eek::omg:
:slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber: :slobber:
:worship: :worship: :worship: :worship:
:youtheman:
:up: :up:

Joe_Breezy

[RedRaider]

:woot:...IT IS IN STOCK @ SIDEWINDERCOMPUTERS...:woot:


Get them while you can...

Only 10 for sale...

Bitspower Black Freezer for Asus Rampage II Extreme - AIX58NSE (http://www.sidewindercomputers.com/biblfrforasr.html)

[Maliqus]

Have someone real photos of this blocks ?