Silverstone TJ07

[dingdong555]

Hey all!

Some have you may have seen my worklog over @ XS but it has changed :) well.....about too.

Hardware -

Q6600 @ 3.6ghz
4870
Asus maximus Formula II
4gb Corsair Dominator 1066mhz
150gb Velociraptor (OS/GAMES)
750 Samsung (STORAGE)
Corsair HX 620
Silverstone TJ07

Cooling -

Fuzion V2
EK 4870CF FC block
Swiftech MCR320 <---Looking to get a TFC 360
3 High speed yate loons on MCR.
355 pump with XSPC top
10 1/2 DD Fat boys.
2 TFC compression
TFC Blue UV 1/2 3/4 tubing.
2L Blue UV pre mixed TFC coolant
DD Fillport
"T" Block
EK 250 res with Anti Cyclone

This was a shot BEFORE or currently as i haven't installed the new items yet ;)

http://i36.tinypic.com/ixz9r5.jpg


Any a teaser of my package I got yesterday.

http://i33.tinypic.com/9l9zi8.jpg

[TedShred]

looks good! lookin' forward to updates

[Septim]

hmm too small a teaser leaves me wanting more...

[dingdong555]

Ok guys! Little update for you, I can't wait until the weekend to install everything so I installed the EK 250 res on the motherboard tray, no liquid is passing through it as I'm using my current loop (until the weekend :) )

Please tell me your honest opinion on the placement of the res/sleeving. I need your advice! :up:

http://i38.tinypic.com/14loenn.jpg

http://i35.tinypic.com/2hx94pj.jpg

[RedRaider]

Looks Great...:coolup:

That sleeving is SICK...:wth:

[Septim]

its good...

[dingdong555]

So do you think it looks good with the sleeving on the outside or should it be under?

[RedRaider]

I say, show off the sleeving...:coolup:

[Septim]

show off the sleeving, and you can align them well enough as and added bonus looks...

[dingdong555]

In that case,expect some updates sooner ;)

[bigslappy]

Looking GOOD , Bro !!
But get the EK black res hold downs
better in Black than the clear & they go all the way around the Res & lock down

[dingdong555]

i just had a VERY PROGRESSIVE DAY!

Got home from school, said, "nah, can't wait until the weekend! Why not do it now???" And I'm finished in about 4 hours :)

Changed all my barbs/tubing/pump top/res/liquid. =)

Updates TOMORROW when i get my UV lights ;) I promise.

[RedRaider]

I can't wait to see it...

That sleeving is pure sickness...:eek:

[Septim]

hmm yah my hand eye coordination got sick when sleeving my PSU 24 wires...

less than 24hours and ticking...

[dingdong555]

Yes I'm PISSED!

FFS!

Sorry guys. I weas about to leave for school this morning then I saw blue LIQUID ON MY DESK!!!!! Luckily, I saw it, no damage to ANY hardware. It was because I used different barbs on my Swiftech MCR320QP as opose to the Swiftech High flow ones. Oh well, just another excuse for me to order TFC360 ;) Should be here by wednesday I'm hoping. Also a new monitor is on its way :down:

[RedRaider]

It's always nice to have an excuse to buy new hardware.

Good Luck...:coolup:

[bigslappy]

what barbs were U using that leaked ??

[dingdong555]

what barbs were U using that leaked ??

Fat boys.

I leak tested it for 4 hours on Thurday night, all went well. Turned my computer on before school on Friday, it was fine. Turned it off, went and got ready, came back! Blue coolant on my desk! >=( That's ok. TFC360 rad is coming, along with a 2433BW monitor :)

[RedRaider]

Nice ..... :D

[dingdong555]

Ok all!

Well, I got my TFC360 radiator on Wednesday, installed it with 2x Feser rotaries off my mate that I got, leak testing.............. Put and paper towel around the 45* rotary and it had blue coolant on!! Another LEAK!. Once I drained the system, I looked at the rotaries and one of them had a bigger gap than the other (where the rotary bit is)

I just went back to my "Fat Boy's" and all has been going well! Temps have only dropped by about 2*C lol.

New camera is coming soon so say goodbye to shit pictures :) These are the best i could do! (FOR NOW! More coming!!)

http://i36.tinypic.com/v3k904.jpg
http://i33.tinypic.com/kb22iq.jpg
http://i37.tinypic.com/2ebzamq.jpg
http://i37.tinypic.com/6j3xh0.jpg

[RedRaider]

I like your build.

The blue tubing and fluid is niiiiiice...

Wonderful cable management.

[dingdong555]

I like your build.

The blue tubing and fluid is niiiiiice...

Wonderful cable management.

Thanks R3. Means alot coming from a man with 7 PA 120.3's haha :p and the site owner!

MurderMod backplate might be an option for me, i REALLY want to sell this beast so I can do ANOTHER one! I love doing them. I am even considering selling PC's on ebay but I need a few $X000 to start it up :mad:

[dingdong555]

My black powder coated Serpentine Backplate has now been shipped to me! a HUGE thanks goes out to Charles and nils, those 2 guys are truly amazing. http://www.xtremesystems.org/forums/images/smilies/thumbsup.gifhttp://www.xtremesystems.org/forums/images/smilies/thumbsup.gifhttp://www.xtremesystems.org/forums/images/smilies/thumbsup.gif

Also, just went to bunnings and got blue paint....hmmm.....what could i be doing do that???

I'm on school holidays now so I will "paint" something tomorrow ;)

[zlojack]

Nice build!

Looking very pro!

[dingdong555]

Thanks man.

Small update, I emailed Nils/Charles and wanted advice from them as they're the "Professionals" in my eyes. They gave me a few suggestions, one of them was the red heatsinks had to be taken off and they don't "go" with blue. Why take them off? I thought to myself, so I painted them blue ;) Turned out pretty much the exact same colour as the tubing under NO UV. Looks pretty good in my books, my backplate has been removed, just waiting for the MurderMod one to arrive :) (Thanks Charles/Nils) and something else "Black" is drying.....:confused:

Few pictures (New camera tonight hopefully!!!)

http://i41.tinypic.com/2rzce9t.jpg
http://i42.tinypic.com/bgqw6r.jpg

[Overclocking101]

hey nice motherboard! I wish I had one just like it, where'd you get it?? ;)

[skinnee]

nice touch with the blue guards on the mosfet coolers. I see Charles is starting to influence you all the way in Aus.

[dingdong555]

nice touch with the blue guards on the mosfet coolers. I see Charles is starting to influence you all the way in Aus.

Nils was the first guy I dealt with, (the sleeving - before it was on murdermod)

Those 2 guys are awesome!

Anyway, my newly black painted DVD drive is drying :) *RRR exclusive*

[RedRaider]

Nils was the first guy I dealt with, (the sleeving - before it was on murdermod)

Those 2 guys are awesome!

Anyway, my newly black painted DVD drive is drying :) *RRR exclusive*

Ohhhhh.....

More RRR exclusives guys....:slobber:

[Boyu]

wow those sleeving are nice, good work bro

[Fitseries3]

looks great man! i love that mobo.

i just wanted to share an idea for anyone with a TJ07.

i machined my mid section divider to allow me to pull my whole water loop out without draining or dismantling it.

http://www.realredraider.com/vbulletin/attachment.php?attachmentid=134&stc=1&d=1229657161

[dingdong555]

Ok, Christams Eve, I got a present from Santa (aka. Charles) early. It has been opened, it was looking at me saying, "OPEN ME NOW."


Thanks Charles/Nils, amazing guys! :up:

http://i44.tinypic.com/11hyr6g.jpg
http://i44.tinypic.com/1oot1s.jpg
http://i42.tinypic.com/2i27fh5.jpg

My DVD drive MAY be dry soon so expect more updates then. Sorry about the long delay for updates!!!

Anyway! Enjoy!

if I don't get to post my next update before tomorrow, Merry Christmas all! I hope Santa comes! :p:

[R0bert]

Btw, how long is this DVD drive drying ? ;O
Looking forward for some updates always nice to see TJ07 and murderMod especially :)
________
Yamaha DS7 (http://www.cyclechaos.com/wiki/Yamaha_DS7)

[dingdong555]

Btw, how long is this DVD drive drying ? ;O
Looking forward for some updates always nice to see TJ07 and murderMod especially :)

Oh shit, sorry all! I thought i updated it but I must have missed it :(

Here are a few not so shabby pictures. I was in a rush, as you can tell. the red PCI cover that I circled, I can't find ANYWHERE!!! Ashamed I am a n00b at cameras so please bare with me :) :D Again, i would like to thank everyone for their kind comments, Charles and Nils for everything they have done and all the other inspiring work logs on here!


http://i41.tinypic.com/mh6a0y.jpg
http://i39.tinypic.com/34xj82f.jpg
http://i40.tinypic.com/5dwi9k.jpg
http://i40.tinypic.com/33kx0uv.jpg

[Septim]

it looks very nice...

[R0bert]

Looks very nice, though blue isn't my fav colour ;)
________
Yamaha YZ125 (http://www.cyclechaos.com/wiki/Yamaha_YZ125)

[Eddie3dfx]

I've always been a big fan of the TJ07. That looks very nice.

[dingdong555]

Thanks guys. Full pictures tomorrow.

[Sniper]

Love the blue! Also liking the fact you moved the res over & didn't cover it with the wires. Makes the wires look nicer to.

[dingdong555]

Love the blue! Also liking the fact you moved the res over & didn't cover it with the wires. Makes the wires look nicer to.

Yeah, thanks all for your kind comments!!!

Well, too many people said, " SHOW ME THE WHOLE CASE NOW," so i guess I have too :) These pictures aren't the best because

1) The window on the case reflects EVERYTHING!
2) I'm a "photo-n00b"
3) There is none.

Happy NEW YEAR! Bring ON 09'!

http://i43.tinypic.com/30mrhoh.jpg
http://i44.tinypic.com/1409i14.jpg
http://i42.tinypic.com/b7g8qx.jpg
http://i39.tinypic.com/2h33bwj.jpg
http://i40.tinypic.com/2mxl7rp.jpg
http://i42.tinypic.com/28m1atc.jpg
http://i40.tinypic.com/294ifqg.jpg
http://i44.tinypic.com/30swsig.jpg

[Septim]

yes, nice... colored them with mobo and liquid is good...

[mcoffey]

Very nice and clean build. It's amazing what a builder can do with a few clean, simple well thought out accents.

Congrats,

andyc

[coolmiester]

Very nice dingdong - if i was to be really really picky i would say take 1/2" off the hose from CPU to GPU and it would look much better ;)

[dingdong555]

Very nice and clean build. It's amazing what a builder can do with a few clean, simple well thought out accents.

Congrats,

andyc

Thanks andy.

Very nice dingdong - if i was to be really really picky i would say take 1/2" off the hose from CPU to GPU and it would look much better ;)

Thanks man! means alot coming from you, I can understand where you're coming from, only issue is that I would have to drain the loop, I could keep *most* of the feser liquid but the rest would go to waste. Down here in Australia, 1L of FeserOne is $40 :mad:

yes, nice... colored them with mobo and liquid is good...

Thanks.

[Snyxxx]

Any pictures of the painted DVD?