FITS Acrylic Dtek Fusion Tops

[Fitseries3]

IDK if this is in the right catagory but it is new and its a product.

i made these a few months ago but sold them all.

since then i have had TONS of people requesting that i keep making them.

IF i get a good response here then i will make another batch.

they are a bit pricey but the material costs a bit ... so no complaining please.

you WILL need either a quick-mount, pro-mount, or the new v2 universal bracket.

these will work on both the v1 and v2 fusion. i include new screws that are a tad larger than the stock dtek ones. this helps with strength in holding the top tight on the base while not being weak to cause cracking in the acrylic.

this is the 4th revision or the top. this version has quite a bit of flow compared to the stock fuzion top. i have also made it possible to use the red nozzle kit if you choose to.

any other questions just ask.

http://forums.techpowerup.com/attachment.php?attachmentid=18924

http://forums.techpowerup.com/attachment.php?attachmentid=18926&stc=1&d=1223004576

http://forums.techpowerup.com/attachment.php?attachmentid=18927&stc=1&d=1223004576

http://forums.techpowerup.com/attachment.php?attachmentid=18928&stc=1&d=1223004576

http://forums.techpowerup.com/attachment.php?attachmentid=18930&stc=1&d=1223004576

http://forums.techpowerup.com/attachment.php?attachmentid=18931&stc=1&d=1223004576

http://forums.techpowerup.com/attachment.php?attachmentid=18907&stc=1&d=1222967287

http://forums.techpowerup.com/attachment.php?attachmentid=18906&stc=1&d=1222967287

http://forums.techpowerup.com/attachment.php?attachmentid=18909&stc=1&d=1222967287

http://forums.techpowerup.com/attachment.php?attachmentid=18908&stc=1&d=1222967287

[Kayin]

Excellent work...

This might go closer to DIY, but I'm thinking about an area where people who get it right can flaunt their wares. You, sir, have gotten it right.

[Sniper]

Definitely a new product! I can't wait till you make the new batch dude! I will for sure be getting one of these for my V2! Love the look of them for sure!

I've heard people ask you before about making an Acetal top run? Any thoughts on going through with that? Either way I'll get one of each if you are lol.

[Xilikon]

Definitely a new product! I can't wait till you make the new batch dude! I will for sure be getting one of these for my V2! Love the look of them for sure!

I've heard people ask you before about making an Acetal top run? Any thoughts on going through with that? Either way I'll get one of each if you are lol.

+1 on a acetal run. If this improve a bit over the stock top, it would be a nice pick. I have both v1 and v2 myself ;)

[Fitseries3]

if you guys cal locate some acetal cheap i'll do a small run of them.

if i can get at least 12 people that want each acetal/acrylic then i'll do another small batch.

if i can get 24+ people for both then the price will start to drop.

[Sniper]

Well one here for both lol. 11 more to go heheh

[Xilikon]

Before I commit, what would be the expected price for the acetal top ? If it's ok for me, add my name to the list.

[Sniper]

Been looking around & these guys seem to be fair priced.

http://www.professionalplastics.com/

[Sniper]

Before I commit, what would be the expected price for the acetal top ? If it's ok for me, add my name to the list.

I think it depends on what price we the Acetal is mostly. If we can find the best price on it then better for us.

[Fitseries3]

someone price a 12" x 12" x 1" sheet of acetal and i can let you know. i'll look here in a minute.

as for the acrylic ones... they sell for $45 shipped in the US. i can lower the price if more than 24 sell.

[Sniper]

http://www.professionalplastics.com/ACETAL-POMSHEET-RODS

12x12x1" sheet here is $152.18

[Fitseries3]

thats 4x as much as i pay for the acrylic :eek:

[Fitseries3]

http://www.usplastic.com/catalog/product.asp?catalog_name=USPlastic&category_name=8765&product_id=10652

$99 there.

getting closer. if we can find it under $80 i'll do it.

[Xilikon]

Found 1.2x11.8x11.8 on ebay : http://cgi.ebay.com/Plastic-Delrin-100-acetal-plate-1-25-x-11-8x11-8-BLACK_W0QQitemZ350025572354QQcmdZViewItemQQptZBI_P lastics_Equipment?_trksid=p3286.m20.l1116

[Fitseries3]

ahhh... not bad. thanks.

[Fitseries3]

a few pics from ppl who own them already....


http://i162.photobucket.com/albums/t245/zbtbabyfactory/New%20PC%20pics/DSCN0871.jpg

http://img.techpowerup.org/081021/Capture101.jpg

[Big_Daddy]

Interstate plastics (http://www.interstateplastics.com/detail.aspx?ID=AcetalUnfilled-SB10) 12 x 12 x 1 $66 a foot.

Do I get a cookie? :)

[Xilikon]

Interstate plastics (http://www.interstateplastics.com/detail.aspx?ID=AcetalUnfilled-SB10) 12 x 12 x 1 $66 a foot.

Do I get a cookie? :)

:woot: Great find !

[Fitseries3]

yup.... looks like i'll be doing a few in delrin.

[Xilikon]

yup.... looks like i'll be doing a few in delrin.

I assume for 50$ approximately each ?

[Fitseries3]

about that yes. is that too much?

thats materials + labor + shipping and a few dollars profit.

[Fitseries3]

heres the one i sold to CD...

http://img407.imageshack.us/img407/54/majorcabling020yx6.jpg

more pics here... http://www.overclock.net/cyberdruidpc/362440-client-build-log-theunlikelyhero.html

[Xilikon]

about that yes. is that too much?

thats materials + labor + shipping and a few dollars profit.

No, that's right. It's the price to pay to have a exclusive WC part. Count me in (I'll convert the v1 to this and put the v2 on the HTPC instead) but I'm in Canada. If you want to give me a exact price with shipping and details to reserve one, just PM me.

[Fitseries3]

shipping to CA is same man.

[Xilikon]

shipping to CA is same man.

Great... Now that I'm thinking, I'm considering asking you to send mine to skinnee for testing and I'll deal with him on shipping it to my house. I like to have some performance data with this top for reference if skinnee doesn't mind.

[Sniper]

Sweet I'm in for 1 of each! Woot!

[skinnee]

Great... Now that I'm thinking, I'm considering asking you to send mine to skinnee for testing and I'll deal with him on shipping it to my house. I like to have some performance data with this top for reference if skinnee doesn't mind.

I'd be honored Xilikon! :up:

[RedRaider]

Test results would be RedRaider Technology and Skinnee Labs exclusive right???

[skinnee]

All depends on what the supplier of the gear to me wants.

edit:

within reason of course. ;)

[Xilikon]

Sure I want it to be a R3 exclusivity if I provide the sample ;)

[skinnee]

Agreed. :cheers:

[Baleful]

Wow these are nice. I love that it replaces the stock middle piece with the washer. I've got enough pressure going through mine that it busted the first washer, and started to wash away all the adhesive from the 2nd one.

[skinnee]

What pump are you using?

[Baleful]

Funny thing is, it's just a DDC-2 with Petra's Top. I haven't done anything else to the pump.... i dunno....

I think it had to do with the 3.5 nozzle i was using at the time..... swapped to the 4.5 and haven't had the problem since.

[Overclocking101]

these are sick ass tops, fit is the man! I get all my fit stuff free because im that damn good, just kidding! lol

[skinnee]

Funny thing is, it's just a DDC-2 with Petra's Top. I haven't done anything else to the pump.... i dunno....

I think it had to do with the 3.5 nozzle i was using at the time..... swapped to the 4.5 and haven't had the problem since.

The 3.5mm nozzle is a pressure pig. The back pressure you get is extremely surprising. I was completely unaware of the repercussions you experienced though.

[Sniper]

these are sick ass tops, fit is the man! I get all my fit stuff free because im that damn good, just kidding! lol

lol Your a lucky dude then haha!

[Baleful]

The 3.5mm nozzle is a pressure pig. The back pressure you get is extremely surprising. I was completely unaware of the repercussions you experienced though.


OH yeah man, the backpressure was insane. I might still have the original washer around here somewhere, if I find it i'll be sure to post it. The backpressure from that thing screwed with alot of stuff. The insides of my block weren't physically hurt.... but i dunno without pics i can't really explain what I saw.... sorry.

[zlojack]

Very nice tops.

[Xilikon]

Fits, could you make a new thread for the group buy of the tops so you can list how much of each group commited along with the pricing infos ?

[Fitseries3]

yes but i havent even ordered the material yet LOL!

you guys want them today and in all reality it wont be till after the 1st of the year.

i'll do my best to hurry the process along.

[Xilikon]

yes but i havent even ordered the material yet LOL!

you guys want them today and in all reality it wont be till after the 1st of the year.

i'll do my best to hurry the process along.

No problem with this schedule, I just wanted to have this thread with your estimate ETA. That will surely help those who got money during xmas to add their name in the list then you start making them after new year eve.

[Fitseries3]

im trying to sell some stuff to get the financial part of the blocks out of the way right now. if you guys wanna look at my stuff for sale that would be a great help.

link in my sig. :)

[Cutless009]

Fit: How much do you need to make this batch? I may be able to front the money for you so you can get these out to the people and u can pay me back afterwards, pm me.

[Septim]

nice top replacement.

nice stuff for sale too, am sure you gonna sell those pa120.3s fast.

[Xilikon]

I also don't have problem paying up front. You can also ask for a deposit so you can get the material and time up for making the batch.

[RedRaider]

Way to go Cutless...:up:

Way to be progressive and look out for the site...:up:

I think this batch should be for sale to RedRaider Technology members only.:idea:

[Fitseries3]

im working on it guys.

[Sniper]

Lol Red I don't think we'd be able to buy them All haha. That's prolly like 24 tops roughly heheh.

[RedRaider]

If they want them, they will join...:igotit:

[Fitseries3]

24 x $45 = $1080 + shipping ;)

[WP730]

Any left in late Jan? I'd love to get one, but won't have any extra $ 'till then (Christmas with three daughters is not necessarily real $ fun ;))

[Fitseries3]

should be a few left. might be a surge of buyers though. if you can prepay even $5-10 i will hold you one if your sure you want it.

[WP730]

should be a few left. might be a surge of buyers though. if you can prepay even $5-10 i will hold you one if your sure you want it.
Yeah, I can do that 'round next week-ish.

...depending on how much fun the wifey is having with Amazon :D

...and I'm ubersure.

[Baleful]

Put me down for 1. I've got some mods brewing for the Dtek V1.

[Langer]

Sign me up - I'll take one.

I assume this will fit the V2?

[Armeniandave]

Fits where do you live? I might be able to get the delrin from work. How big a piece you need? We use this stuff all the time.

:un:

[Xilikon]

Sign me up - I'll take one.

I assume this will fit the V2?

V1 and V2 will fit since it will just use the copper base, which is the same.

[razar]

I just joined here so that I may put my name on the list for one of these Acrylic tops. Are there any perf numbers on previous product samples? It looks like better flow compared to the v2 at least.

[Gir]

Man, if only you could use these with the stock bracket.

Great work regardless!

[nafljhy]

indeed, fits' work is wonderful. i got one too. :) i can try to make a mount for it too gir. we'll see what happens. :p

[Fitseries3]

thank you :)

if you guys have any other ideas you want made let me know.

[Langer]

Solid Copper - I'd love one from solid copper.
PM me with a price if you're interested. =)

[Chicken Patty]

awesome work fit!!! :)

Too dbad I have a different block, would love to see one for myself.

[Xilikon]

I just joined here so that I may put my name on the list for one of these Acrylic tops. Are there any perf numbers on previous product samples? It looks like better flow compared to the v2 at least.

Technically, it should perform very close to the v2 top and a bit better than the v1 (it fix the leaking middle chamber). The main difference is that the stock tops have 4 holes in the corners for water to escape while this custom top have space all around, which improve exit flow.

I will ask fitseries to send my delrin top to skinnee for testing so we can have the performance numbers on hand :)

[razar]

I see what you mean Xilikon...makes perfect sense to me :)

Fitseries3, paypal I assume?

[Fitseries3]

paypal yes.

[BDW88]

can I get on the list for a V2 block or are you sold out already?

pm me if anything

[Fitseries3]

i start milling them next week.

[Eddie3dfx]

Fit, not sure if I commented already, but those are gorgeous.

[Fitseries3]

Fit, not sure if I commented already, but those are gorgeous.

thanks ;)

[BDW88]

would really like to get one of those blocks, can pay up front for the next run if the batch your making this coming week is sold out.

sent you a PM and still waiting for a response. and yeah your blocks look awesome!

[RedRaider]

Fits3....... I'm getting impatient...:wasntme:

[Xilikon]

would really like to get one of those blocks, can pay up front for the next run if the batch your making this coming week is sold out.

sent you a PM and still waiting for a response. and yeah your blocks look awesome!

I think he's making a batch in acrylic and a batch in acetal/delrin so there should be plenty for everyone.

[cheapskate]

Those look outstanding. I'm shocked no one has taken the time to polish one before they installed it. I kinda wish I had a D-tec now.

@Fitseries3 - Do you have any pics of your machinery? I'm playing with the idea of getting some more serious equipment...

[nafljhy]

i got one previously from fitseries3 and polished it up nicely. and i have to say once its been polished, it loves so beautiful.


fits: ygpm.

[razar]

I need to look into how to polish acrylic then....

[Fitseries3]

for an extra $5 i'll do it for you.

[Sniper]

for an extra $5 i'll do it for you.

I'll take you up on that offer for mine dude for sure!

[Fitseries3]

this one has a half assed polish job but you can see it looks decent. i'll be sure to do a full assed polish job for anyone who pays the $5 though. :p

yes i know the block needs to be cleaned.

http://www.realredraider.com/vbulletin/attachment.php?attachmentid=213&stc=1&d=1230564347

[razar]

for an extra $5 i'll do it for you.

Deal! :)
If/when you need any pre-payment or info just pm me

[Gazmtk]

polishing acrylic is actually reasonably easy but for $5 more thats a steal :)
If I still had my Fusion I would grab a top for sure, btw they look great and perform as good as they look, hard to say no too.... anyone got a spare fusion base :rolleyes:

[razar]

polishing acrylic is actually reasonably easy but for $5 more thats a steal :)
If I still had my Fusion I would grab a top for sure, btw they look great and perform as good as they look, hard to say no too.... anyone got a spare fusion base :rolleyes:

Actually, I do have a spare v1

[Fitseries3]

i need to confirm that 12 delrin tops will be sold.

i already know that all 24 of the acrylic ones are basically sold but im considering making more.

[Xilikon]

i need to confirm that 12 delrin tops will be sold.

i already know that all 24 of the acrylic ones are basically sold but im considering making more.

Hope I'm counted in the delrin lot :cool:

[Fitseries3]

prepay/preorder starts monday for acrylic tops. delrin TBA.

$10 per top per person. paypal balance preferred.

[nafljhy]

sweet! i'll definitely be getting a couple more! :) great work as always fits!

[Xilikon]

prepay/preorder starts monday for acrylic tops. delrin TBA.

$10 per top per person. paypal balance preferred.

Cool, LMK when the delrin version is ready to be made.

[RedRaider]

Fits3.... Can I get an Acrylic or do you only have availability on Delrin?

I'd prefer a polished Acrylic.:)

[Fitseries3]

still trying to figure the delrin out. as soon as i know how much material im getting i can let you guys know how many i'll have to sell. seeing how i only have interest for about 5-6 delrin tops thats probably all that will be made for now. :)

[RedRaider]

Fits3, I asked if you still have any acrylic tops available for people in your upcoming run?

[CrazyJoe]

I'm still in for 1 delrin and 1 acrylic ... both with the double outlets please !

And, did you get my PM about the delrin ?

[Fitseries3]

yes sir. the 24 roughly accounts for all you guys that have requested one with a few for people that have not spoken up yet.

[Fitseries3]

I'm still in for 1 delrin and 1 acrylic ... both with the double outlets please !

And, did you get my PM about the delrin ?

yup. will do man.

dual ports will have to be added after the run is complete but wont be a problem at all.

[BDW88]

Put me down for polish :D

[smee]

Hmmmm, what if we had Two inlets which angled and both met at the center of the block and went through to the copper (like a Y if that makes sense), it'd be a lot of positive pressure....
and a single outlet....

Is this possible Fits?

[Fitseries3]

at this time im not going to try something like that. adding the 2nd port is done by simply rotating the block in the machine and rerunning that part of the program.

[smee]

at this time im not going to try something like that. adding the 2nd port is done by simply rotating the block in the machine and rerunning that part of the program.

No prob, was just a thought... probably won't make a difference in temps anyways...

lol.

[RedRaider]

Put me down for a POLISHED ACRYLIC....:up:

[CrazyJoe]

Polished Acrylic for me as well ... :up:

[bigslappy]

now these are for the D-Tek V1 only ?? not the V2 ?? is that right ??

[Langer]

that is wrong. I asked that question a few pages back

[Fitseries3]

both.

langer... did i miss your question? im sorry. :)

[bigslappy]

Ok I wasn't clear on that sorry about a DDb post

Just wanted to MAKE sure

[Xilikon]

Ok I wasn't clear on that sorry about a DDb post

Just wanted to MAKE sure

Just to be clear, what we will be using is only the copper base and the mount of the Fuzion. V1/V2 share the same pro mount and base so it's ok. Only the delrin top differ for both.

[smee]

Just to be clear, what we will be using is only the copper base and the mount of the Fuzion. V1/V2 share the same pro mount and base so it's ok. Only the delrin top differ for both.

Actually, according to Martin M's testing, there just slightly different:
http://img360.imageshack.us/img360/6076/picture23kl7.png

This is one of the reasons why the fuzion V2 is slightly better than the V1...
BUT, for these tops, I doubt anyone will notice a difference between the V1 base and the V2 base.
Personally, I'll be using a V1 base. :up:

[Metal]

Can't wait till these are done slackass haha

[Xilikon]

Actually, according to Martin M's testing, there just slightly different:
http://img360.imageshack.us/img360/6076/picture23kl7.png

This is one of the reasons why the fuzion V2 is slightly better than the V1...
BUT, for these tops, I doubt anyone will notice a difference between the V1 base and the V2 base.
Personally, I'll be using a V1 base. :up:

Thanks, I missed that note. That explain why I felt the v2 base was lighter a bit vs the V1 (I got both myself in 2 computers).

[razar]

I have a question.....
Why would one have 2 outlet's?

Now allow me to attempt an answer to my own question lol.....
Too cool 2 other chipsets without "stacking" the heat. One outlet to cool NB, the second to a GPU for example, then converge with a Y to a Res or to 2 inlets on a Multi optoin Res.

How'd I do?

[Sniper]

No it has to do with flow inside the block itself. It hits in the center so to eliminate swirling better you have 2 outlets so it goes right up those 2 rather than trapped swirling inside the block basically. Least that's my interpretation on it.

[razar]

Thanks for setting me straight Sniper...
So I was barking up the wrong tree then. I wonder what the temp diff would be.

[Fitseries3]

nah..... your idea is actually pretty good. you'd just need a lot of flow from the pump

[razar]

ya know.....I think I'll go for that dual outlet as well if it's an option.
So for me... Polished Acrylic with dual outlets please. :)

[Xilikon]

I think having dual outlets might kill the performance. The swirling motion might be more beneficial to pick more heat IMHO ;)

[Fitseries3]

I am now taking preorders.

PM me with your order and i will give you the paypal address.

$10 PER top*

*preorder amount will be deducted out of your final total amount due. this is non refundable.

please dont tell me a story in your PM. tell me how many and what options you want.

thanks,

Fit

[lyl]

Ah, I remember these! I was in for one when you first posted them to XS/[H], but i guess i forgot to check back when you sold your first batch.

Id be in for one if there's a 2nd

EDIT: just read the other 4 pages :P
ygpm

[WP730]

still trying to figure the delrin out. as soon as i know how much material im getting i can let you guys know how many i'll have to sell. seeing how i only have interest for about 5-6 delrin tops thats probably all that will be made for now. :)
Did you count me in on that?

[Sniper]

Anyone that wants one please shoot Fits a PM

Send your deposit then you'll get put on the for sure list

Anyone not sending deposit there will be no guarantees & you'll not be put on the list so send in those deposits people.

[Fitseries3]

there will be no delrin top preorders at this time.

[WP730]

there will be no delrin top preorders at this time.

Is there enough interest to make them? I'll get an acrylic rather than nothing, but I'd prefer delrin.

[Fitseries3]

they will be made but at this time i cant say how many so im not going to take money on them until i know.

[Xilikon]

they will be made but at this time i cant say how many so im not going to take money on them until i know.

So far, I see 4-5 people (me included) interested in a delrin version. I will await patiently until a preorder is offered :mod:

[Fitseries3]

its not the lack of interest... its the cost of material. delrin is hard to find as cheap as acrylic so it costs a tad more. if i was buying truckloads of it the price would all be the same and would be cheap.

[Sniper]

Yeah Xilikon they will get made though don't worry heheh

[WP730]

its not the lack of interest... its the cost of material. delrin is hard to find as cheap as acrylic so it costs a tad more. if i was buying truckloads of it the price would all be the same and would be cheap.You will charge more for the delrin, right? I'd hate to see you not recoup your costs on them.

I'm willing to shell out a few more $ for what I want if that helps you any. After all, I'm already committed for at least $50 for something that's not a strict "need" :)

BTW, Fitseries3, you have anything else you're using that machine for? I'd love to get something else to match...

[Fitseries3]

we are running a bit behind schedule but things are progressing along now.

beleive it or not... that sheet will make about 55 tops.

these will be a little more low profile than the last batch. thats a good thing though :)

http://forums.techpowerup.com/attachment.php?attachmentid=21905&stc=1&d=1232137492

http://forums.techpowerup.com/attachment.php?attachmentid=21906&stc=1&d=1232137492

[Fitseries3]

http://forums.techpowerup.com/attachment.php?attachmentid=21908&stc=1&d=1232141200

http://forums.techpowerup.com/attachment.php?attachmentid=21909&stc=1&d=1232141200

http://forums.techpowerup.com/attachment.php?attachmentid=21910&stc=1&d=1232141200

[WP730]

secks

[BDW88]

Damn nice!

[Fitseries3]

delrin is in.

acrylics are half way done.

[Septim]

more pics...

[Fitseries3]

http://forums.techpowerup.com/attachment.php?attachmentid=22147&stc=1&d=1232601562

[WP730]

http://forums.techpowerup.com/attachment.php?attachmentid=22147&stc=1&d=1232601562:happy1::clap1::clap::clap::clap1::hap py1:

This is the last thing I'm waiting for to finish my build :)

edit: any chance of having you polish a delrin top for $5?

[Xilikon]

Woot! Delrin pr0n :D

I assume you picked that format since it's less expensive and enough for the small demand ?

[Septim]

very nice 2x6 stick of delrin... might need it to crack some heads...

i also see a nice long tubular thing down there... bong? hehe...

[WP730]

very nice 2x6 stick of delrin... might need it to crack some heads...

i also see a nice long tubular thing down there... bong? hehe...Look like reservoirs. I wonder if Fits is selling those too :hehe:

[Fitseries3]

tops are in. i'll get with you who have preordered here in the next few hours for final payment.

:)

[Fitseries3]

http://forums.techpowerup.com/attachment.php?attachmentid=22201&stc=1&d=1232745698

[Fitseries3]

left - old tops
right - new tops

http://img.techpowerup.org/090123/IMG_3928.jpg

http://img.techpowerup.org/090123/IMG_3929.jpg

[razar]

nice....

[CrazyJoe]

Fantastic work Fitseries !

Can't wait to see the dual outlets and the delrin too ! :up:

[nafljhy]

nice fits! so good!

[WP730]

Oh boy. I'm getting pretty geeked.

[Septim]

how many are pre sold (with deposit)

and how many still good for selling?

[Fitseries3]

12 on deposit.

38 left that i need sold ASAP.

2 paid in full and will get them shipped tomorrow.

[grumpy]

those look sweet , might have to get one myself. :coke:

[Fitseries3]

I wanted to show ppl what they get for $55. this is not a home made POS top. these are precision machined on a $54,000 3-axis Haas CNC machine.

http://forums.techpowerup.com/attachment.php?attachmentid=22295&stc=1&d=1232935135

http://forums.techpowerup.com/attachment.php?attachmentid=22296&stc=1&d=1232935135

[zlojack]

Looking good, Fits!

[nafljhy]

man, that is such a beautiful top. can't wait to get mine!

OT: are you still using 1/2" of 6-32? for the screws?

[Fitseries3]

i happend to get some 6-32 3/8" brass screws that look alot more appealing. another reason for going with these screws is the head is smaller and fits better than the screws i sent with the first batch. i still may change to a different screw head but these seem to do well.

[nafljhy]

ah okay. sounds good. :)

[Fitseries3]

pics are up on www.superratmachine.com of the milling process.

i'll post them here when i get home. i might have a video soon as well.

more pics too.

enjoy ;)

[Overclocking101]

postem up biznitch

[Fitseries3]

http://www.superratmachine.com/wp-content/uploads/2009/01/dsc02135.jpg

http://www.superratmachine.com/wp-content/uploads/2009/01/dsc02136-1.jpg

http://www.superratmachine.com/wp-content/uploads/2009/01/dsc02138.jpg

http://www.superratmachine.com/wp-content/uploads/2009/01/dsc02146.jpg

http://www.superratmachine.com/wp-content/uploads/2009/01/p1030761.jpg

[nafljhy]

man that is one awesome setup. those tops came out so nicely too.

[Fitseries3]

http://forums.techpowerup.com/attachment.php?attachmentid=22326&stc=1&d=1233029581

http://forums.techpowerup.com/attachment.php?attachmentid=22327&stc=1&d=1233029581

http://forums.techpowerup.com/attachment.php?attachmentid=22328&stc=1&d=1233029629

http://forums.techpowerup.com/attachment.php?attachmentid=22329&stc=1&d=1233029921

http://forums.techpowerup.com/attachment.php?attachmentid=22330&stc=1&d=1233029921

[Fitseries3]

all of them...

http://forums.techpowerup.com/attachment.php?attachmentid=22332&stc=1&d=1233030186

single port....

http://forums.techpowerup.com/attachment.php?attachmentid=22333&stc=1&d=1233030256


dual port....

http://forums.techpowerup.com/attachment.php?attachmentid=22334&stc=1&d=1233030287

[nafljhy]

oh dang, you already made the delrins? they look good man.

[smee]

love the delrins!

[Fitseries3]

just messing around here....

http://img.techpowerup.org/090127/Picture%20434.jpg

[Xilikon]

:fightpoke:

[Septim]

just messing around here....

http://img.techpowerup.org/090127/Picture%20434.jpg


maybe you should post this over there as well... :D

[razar]

woohooo00oo!!!11!!
dual outlet secks.... another piece to my watercooling puzzle.....oh it's gonna rock hard.

[CrazyJoe]

Absolutely perfect !

Thanks again Fit ! :up:

[Fitseries3]

a happy owner sent me this...

http://i2.photobucket.com/albums/y6/exavier/DSC_0843.jpg

[Chicken Patty]

^^^dang looks awesome while at work :up:

[smee]

:eek::eek::wawa::wawa::whoa::slobber::slobber:

THat looks sick man.....

Dangit.

Ok guys, for The blank.box, which should I go with, acrylic or delrin???
I can't decide.... :eek:

[Chicken Patty]

:eek::eek::wawa::wawa::whoa::slobber::slobber:

THat looks sick man.....

Dangit.

Ok guys, for The blank.box, which should I go with, acrylic or delrin???
I can't decide.... :eek:

whatever fit sells :D they look great!

[BDW88]

awesome looking block can't wait til mine get's here.

[Fitseries3]

someone please buy some of these asap.

[Fitseries3]

wtf? they where all flawless before i shipped. if you want you can send it back and i'll trade you for another one. just let me know.

[BDW88]

yeah I want to exchange it cuz even if it didn't leak my OCD would get the best of me and probably take it out.

We can do it like this I'll pay you the same amount $55 in advance and send me another one and I'll send this one back and insure it, just refund me when you receive it.

Nubs @ the local PC shop took one look at it and he was like whoa! I want 30! does he sell in bulk! anyways PM me if anything.

[Fitseries3]

yeah... its no problem swapin you out. idk wtf happen but i'll get you one thats not like that.

tell your shop that they can have 10 if they want.

[Chicken Patty]

^^^top really looks awesome, its real easy to damage something like that, anyways. Glad FIT was able to handle it the way he did and that shows how far customer services goes :D

Glad you guys can resolve it :up:

[BDW88]

Yeah thanks FITS advance sent and I'll let the nubs know you got 10 for sale.

Oh and he was asking if you got any with led's hole's milled out, according to him the Japanese will go crazy for those.

[Fitseries3]

i have a few dual port blocks left. some delrin, some acrylic.

i have 10 flawed tops.

nothing is wrong with them that effects performance or the look.

just minor "pitting" and a few very small chips on the bottom edge on a few of them.

i will sell these for $28 each.

[BDW88]

pics please :eek:

[Fitseries3]

i have 2 with a chip...

http://img.techpowerup.org/090205/Picture%20443.jpg



and 3 with pits...


http://img.techpowerup.org/090205/Picture%20444.jpg

[Langer]

The pits look like they could be buffed out easily.

Why don't you just clamp them down and shave off 1/32th from the surface with your mill?

[Fitseries3]

i could but im tired of these really. lol.

[BDW88]

that's exactly the same chip I have on mine :(

[Fitseries3]

yours and that one are the only 2 somehow. idk.... they have been wrapped up in bubble wrap since i brought them home.

[BDW88]

shit happens man no biggie..

I'm proud to say I own one of your tops even with the chip on it. :)

[Fitseries3]

i have a few delrin and dualport acrylics left if anyone wants them

[dark2099]

So when I finally get off my lazy but and mail you my V2, I want mine to look like the pic you sent me earlier today, only single outlet.

[Fitseries3]

like this...
1366 mount that works with my tops...

http://forums.techpowerup.com/attachment.php?attachmentid=22811&stc=1&d=1234314034

http://forums.techpowerup.com/attachment.php?attachmentid=22812&stc=1&d=1234314034

http://forums.techpowerup.com/attachment.php?attachmentid=22813&stc=1&d=1234314114

[Chicken Patty]

awesome dude :up: I'm sure people would pick those up, good luck :up:

[Fitseries3]

i've got 4 delrin duals and 5 acrylic duals left. i need to sell them asap guys.

will do a partial trade on some ddr3 if anyone is interested.

[Fitseries3]

polished...

http://forums.techpowerup.com/attachment.php?attachmentid=22833&stc=1&d=1234377063

http://forums.techpowerup.com/attachment.php?attachmentid=22834&stc=1&d=1234377063

[Fitseries3]

pics dont show the sweetness that this is...

http://forums.techpowerup.com/attachment.php?attachmentid=22835&stc=1&d=1234378084

http://forums.techpowerup.com/attachment.php?attachmentid=22836&stc=1&d=1234378136

[TedShred]

man, I love the look of polished metal. nice stuff!

[Xilikon]

Just got my Delrin top, it's top notch :up:

Remain for me to get the Heatkiller then i'll do some swapping.

[alejo]

Finally installed mine today. Thank you Mr. Fits! :D

http://www-personal.umich.edu/~alexo/images/fuzionplexi.jpg

[Chicken Patty]

that really looks awesome!