Right angle 8/24 pin

[RampageWSU]

Does anyone make these? I know where to get the headers, but my soldering skills are sketchy.

In a perfect world, I'd love a 180 degree connector for each. Got a cool idea for a case. No wires showing, and hard piping through backside of mobo tray.

[Floyd]

180* connector lol. Just hard solder the wires to the back of the board. Its a little hard because of the solder used on mobos but its been done before.
I dont know of a plug and play solution. Chiller made his connectors.

[RampageWSU]

180* connector lol. Just hard solder the wires to the back of the board. Its a little hard because of the solder used on mobos but its been done before.
I dont know of a plug and play solution. Chiller made his connectors.

I like the idea of soldering to the back, but there is no way I'd attempt such a feat.

[Floyd]

With the proper iron its not that bad. I did it on an old 939 board before.

[DarthBeavis]

That one modder who hates me (Markkebs) did that all the time. Not sure if he is still alive though

[RedRaider]

That one modder who hates me (Markkebs) did that all the time. Not sure if he is still alive though

:rofl: You mean this guy, the one that was here from TPU ??

http://farm3.static.flickr.com/2432/3695980542_34bcfbd973_o.jpg (http://www.flickr.com/photos/realredraider/3695980542/)
self_portrait (http://www.flickr.com/photos/realredraider/3695980542/) by RealRedRaider (http://www.flickr.com/people/realredraider/), on Flickr

[DarthBeavis]

yeah thats him. He has some killer ideas on powering a mobo he never used. Would it be rude to use the ideas if I credited him?

[NeverGive7]

Motherfucker if I ever got that bad someone shoot me please

[RedRaider]

yeah thats him. He has some killer ideas on powering a mobo he never used. Would it be rude to use the ideas if I credited him?

rude? If the guy doesn't care about taking care of himself, then I'm sure he wouldn't mind it one bit if someone took the initiative to bring his ideas to fruition. Just credit the guy for giving you the idea to make what you are going to make and leave it at that.

Besides, that bitch is a suckup on TPU:bird:

[rubidium]

:rofl: You mean this guy, the one that was here from TPU ??

http://farm3.static.flickr.com/2432/3695980542_34bcfbd973_o.jpg (http://www.flickr.com/photos/realredraider/3695980542/)
self_portrait (http://www.flickr.com/photos/realredraider/3695980542/) by RealRedRaider (http://www.flickr.com/people/realredraider/), on Flickr

Hmmm ... looks like a bad case of Firestone's Disease. Pity.

[mcoffey]

Does anyone make these? I know where to get the headers, but my soldering skills are sketchy.

In a perfect world, I'd love a 180 degree connector for each. Got a cool idea for a case. No wires showing, and hard piping through backside of mobo tray.

If you want to get truly trick and cutting edge, don't use any connectors. Hard wire from behind the MB, and use a cover cap on the MB connectors that can be seen. There's tons of tricked out stuff you can do if your willing to spend the time and effort, but it all involves some custom one off work:up:

andyc

[NeverGive7]

Hmmm ... looks like a bad case of Firestone's Disease. Pity.

So is this what you see when you look at that picture then???

http://i307.photobucket.com/albums/nn281/nevergive7/Private/michelin.jpg

[DarthBeavis]

If you want to get truly trick and cutting edge, don't use any connectors. Hard wire from behind the MB, and use a cover cap on the MB connectors that can be seen. There's tons of tricked out stuff you can do if your willing to spend the time and effort, but it all involves some custom one off work:up:

andycwhen I am ready I will ask for advice here bud

[Floyd]

So is this what you see when you look at that picture then???

http://i307.photobucket.com/albums/nn281/nevergive7/Private/michelin.jpg

OMG now thats some good stuff!

[jacobroufa]

Bad photochop is bad. NG7 FTMFW! :woot:

[RedRaider]

hahahahahahahahhahahahahahahahahahahhahahahaha

[RampageWSU]

If you want to get truly trick and cutting edge, don't use any connectors. Hard wire from behind the MB, and use a cover cap on the MB connectors that can be seen. There's tons of tricked out stuff you can do if your willing to spend the time and effort, but it all involves some custom one off work:up:

andyc

Sounds cool as fuck. I tend to get obsessed with stuff, so this sounds right up my alley. Don't suppose you have any links to get me started? :coke: