PDA

View Full Version : Question about tube sizing


Eternalightwith
02-22-2009, 06:31 PM
Edit2: Actually nevermind. :p I see that XSPC has colored 7/16" tubing as well. :coke:

Ballz0r: :D Just venting the confusion out. :coke:

As some of you know I'm building my own case. Need source of DIY parts

Ok next question, I need sources for
1. HDD rack.
2. Case wire harness. (Don't need power switch or reset, buying vandals)
2. Some kind of 5.25 bay kit that I can use to put DVD, rheobus, aquaero, etc in. Preferably something I can rivet right to the aluminum sheet metal sidepanel.

PPCs.com sleeves everything and frozencpu.com is a little expensive. Any other alternatives? Idon'twantto go over to the darkside. :mad:

David

P.S. Red, how's the Heatkiller and Iwaki RD30 plans going?

ballz0r
02-22-2009, 07:47 PM
glad we could help :)

Septim
02-27-2009, 05:00 AM
DIY racks, use thin 1/16inch clear acrylic to make a template, line up the mounting holes properly, then transfer to some Aluminum sheet and drill the mounting holes precisely...

wire harness? zip tied everything behind mobo tray when possible...

buy wire sleeving by the roll seems to be the cheaper option... especially if doing only the 1/8 for single wire sleeving...

Eternalightwith
02-28-2009, 07:02 PM
DIY racks, use thin 1/16inch clear acrylic to make a template, line up the mounting holes properly, then transfer to some Aluminum sheet and drill the mounting holes precisely...

wire harness? zip tied everything behind mobo tray when possible...

buy wire sleeving by the roll seems to be the cheaper option... especially if doing only the 1/8 for single wire sleeving...

Yes but i need the jumpers too. you know, speaker, Green power, Turbo, etc.

RedRaider
02-28-2009, 11:57 PM
Why is this thread in the WaterCooling Forum, may I ask?? :shrug: