PDA

View Full Version : 47mm is all I got..

Eddie3dfx
12-13-2008, 05:03 PM
:)

From the Roof of the v2000 to where it hits the first EK block screw.. (not acrylic but the actual black screw)

Yes sir, I want to mount a radiator and fan to the top.

I hope this is accurate, but apparently the black ice pro is 25mm deep??

http://www.sidewindercomputers.com/blackiceproii.html

add in some 20mm yates and we might have a party here folks.. (45mm total)

http://www.frozencpu.com/products/7558/fan-454/Yate_Loon_120mm_x_20mm_Slim_Fan_-_Medium_Speed_D12SM-12C.html

Of course it's 2 radiators in this loop... 1 thick bix with a 88cfm yate loon by the front.

It's either that or machine out a thinner ek top..


This is what it looks like with a beatup mcr220 (34mm thick) and a 25mm thick yate loon (59mm total) look like Keep in mind that block is in the middle tri-slot, not the top SLI slot.

http://img518.imageshack.us/img518/1936/dscf0876av9.jpg
Eddie3dfx
12-13-2008, 08:21 PM
Fudge it, I'm just going to pickup a FUFUFUFUFUFUFUFU shroud and this will give me a ton of room.

http://www.performance-pcs.com/catalog/images/products/PCA71B-EHX1020_01.jpg
Snyxxx
12-13-2008, 08:58 PM
I always thought those shrouds looked good from the first days I started watercooling.
bigslappy
12-13-2008, 10:18 PM
Yeah I Like Them & will be useing one soon on my Torrent build ...
Septim
12-14-2008, 12:32 AM
yeah they are nice to look at... wonder if i can remove the FUFUFUFUFUFUFUFU name (if i have to) for uniformity...
bigslappy
12-14-2008, 12:48 AM
I think I think It's like the logo they put on new cars I think ....
bigslappy
12-14-2008, 12:49 AM
Fudge it, I'm just going to pickup a FUFUFUFUFUFUFUFU shroud and this will give me a ton of room.

http://www.performance-pcs.com/catalog/images/products/PCA71B-EHX1020_01.jpg that'll give ya push/pull room
Eddie3dfx
12-14-2008, 08:38 AM
that'll give ya push/pull room

Let's not go that far :)

I actually had to double check.. I only have 45mm of space.
Not sure anything would work without a shroud at this point.
Boyu
12-18-2008, 09:43 PM
Black ice pro and 20 mm deep fan will be tigh as well, not to mention the screw head of fan that hold the fan to rad itself, you have to make sure that the head of screw not interfere with your vga
Eddie3dfx
12-18-2008, 10:04 PM
Black ice pro and 20 mm deep fan will be tigh as well, not to mention the screw head of fan that hold the fan to rad itself, you have to make sure that the head of screw not interfere with your vga

It was so close, that I decided that only a FUFUFUFUFUFUFUFU shroud would give me an appropriate amount of room.
Lesson to be learned, do not go triple or quad on the top of a v2000 if you want to sli. It is impossible without a shroud.