Post pics of your Water Cooled Rigs [Archive] - RRTech...The SOURCE for Extreme Liquid Cooling

Langer

12-14-2008, 10:10 AM

PROMETHEUSCU

project is still a Work In Progress but the loop layout is finished.

What do you think?

The Blocks:
http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-aquagrafx05.jpg
http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-chipset-waterblocks-09.jpg
The CPU will use a PrometheusCU edition Watercool Heatkiller Rev3.0
http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-heatkiller-r3-03.jpg

http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-RAM-12.jpg

http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-tubing-test-04.jpg

http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-sleeving-10.jpg
http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-sleeving-11.jpg
http://img.photobucket.com/albums/v60/Langer/PrometheusCu/prometheus-gfx-power-09.jpg

When I say this is just a very very small teaser, I cannot overstate the word small enough. There's a hell of a lot going on in this beast.

Coming soon to the build logs section of a forum near you. =)

zlojack

12-14-2008, 10:24 AM

Nice Langer!

I'm going to be sleeving my tubing on "Good Things" as well.

RedRaider

12-14-2008, 10:25 AM

INSANE....:slobber:

Cutless009

12-14-2008, 10:47 AM

Wow that makes me want to sleeve my tubing... in fact Im ordering sleeving this week and Im SO doing this....

Snyxxx

12-14-2008, 11:02 AM

Awesome Langer. It is a rare treat to see the RAM watercooled.

I think those AC GPU full cover blocks are beautiful.

Eddie3dfx

12-14-2008, 12:07 PM

Langer, that is really nice.
I have a question.. looks like on the 790i.. (I'm only assuming) you are using a nickel plated nb and sb blocks.
What barbs are you using, because the danger den/bits power fatboys do not work with them properly.

Lagaaja

12-14-2008, 12:52 PM

My first WC system:
http://i448.photobucket.com/albums/qq202/Lagaaja/2-kone2.jpg

The Sonata II - Resurrected build:
http://i448.photobucket.com/albums/qq202/Lagaaja/Sonata%20II%20-%20Resurrected/4-Kuvatus086.jpg

And my current build, The Phoenix:
http://i448.photobucket.com/albums/qq202/Lagaaja/Phoenix/phoe002.jpg
http://i448.photobucket.com/albums/qq202/Lagaaja/Phoenix/phoe006.jpg
http://i448.photobucket.com/albums/qq202/Lagaaja/Phoenix/phoe009.jpg

RedRaider

12-14-2008, 01:24 PM

I like the RED...:king:

bigslappy

12-14-2008, 01:43 PM

COOL keep Em coming Guy's GREAT work by ALL !

cheapskate

12-14-2008, 01:58 PM

I like the car radiator.

This looks like a good place to say hello.
If you don't like my type, blame Kayin... He brought me here from Bit-Tech.
http://i204.photobucket.com/albums/bb255/cheapskate_02/Aug83-10.jpg
http://i204.photobucket.com/albums/bb255/cheapskate_02/Apr82-46.jpg
-Don't laugh. It's a P4...
http://i204.photobucket.com/albums/bb255/cheapskate_02/Oct9-18.jpg
-This is a failed northbridge block attempt. I didn't get it seated right. -BZZZT!
http://i204.photobucket.com/albums/bb255/cheapskate_02/Nov85-22.jpg
-This is a Danger Den TDX with a home made coverplate.
http://i204.photobucket.com/albums/bb255/cheapskate_02/Nov85-26.jpg
-Here's the whole thing. It's another low-end rig, but I got it down to two fans.
http://i204.photobucket.com/albums/bb255/cheapskate_02/Oct86-18.jpg
-This is a block I recently finished for someone who wanted to WC a ViaC7. The bottom is an unused video card block.
http://i204.photobucket.com/albums/bb255/cheapskate_02/Oct85-3.jpg
-This is the north/south bridge block for the Via from the build log.

Big_Daddy

12-14-2008, 02:01 PM

:welcome2: to the club!!!!

Glad to have you aboard. Looks kick ass. keep em coming!

RedRaider

12-14-2008, 02:09 PM

:welcome2:

@Cheapskate...... I like your work...:coolup:

zlojack

12-14-2008, 03:09 PM

Very innovative and creative, Cheapskate!

Langer

12-14-2008, 03:24 PM

Hey hey, welcome Cheaps!
As always, looks great.

bigslappy

12-14-2008, 03:38 PM

WOW that WAY Cool !!! Welcome to the Site !!

Great to have you on board !!!!!!!!!!!!

Armeniandave

12-15-2008, 01:24 PM

That's certainly something you don't see everyday!
Welcome to the site.:)

Heres my pics. MM ascension coming soon.. :modpower:

:un:

Demthios

12-15-2008, 01:40 PM

Here is the one that I've just finished.

Sniper

12-15-2008, 01:56 PM

Nice rigs poppin up guys!

Eddie3dfx

12-15-2008, 05:31 PM

This looks like a good place to say hello.
If you don't like my type, blame Kayin... He brought me here from Bit-Tech.

Glad you joined.
Your setup's are amazing.

RedRaider

12-15-2008, 06:21 PM

These rigs are nice...:up:

skinnee

12-15-2008, 07:24 PM

I like the all copper pipe and bends...its a rarity to see that much work going into plumbing.

Baleful

12-15-2008, 09:13 PM

Great work by all. I love the copper pipes, I've thought about plumbing all my loops that way many times..... still thinking about it....

Well this will get you started. This is almost two years old....... every single peice of hardware has been changed.... loops COMPLETELY reworked. Once I do a breakdown for maint. on Christmas, i'll update it. :D

RedRaider

12-15-2008, 09:15 PM

Post'em....:D

Sniper

12-15-2008, 09:20 PM

lol At most of the admins with unfinished builds unable to post pics of our own rigs heheheh

RedRaider

12-16-2008, 05:31 PM

Baleful.....You're a MountainModder...:woot:

evil-98

12-16-2008, 05:52 PM

http://evil98.insanity-asylum.com/computers/i7/43.jpg
http://evil98.insanity-asylum.com/computers/i7/44.jpg
http://evil98.insanity-asylum.com/computers/i7/45.jpg

RedRaider

12-16-2008, 05:54 PM

:slobber: I like it EVIL :slobber:

evil-98

12-16-2008, 05:56 PM

http://evil98.insanity-asylum.com/computers/i7/41.jpg

RedRaider

12-16-2008, 06:08 PM

:slobber: Keep It coming :slobber:

coolmiester

12-16-2008, 06:08 PM

First post guys so i thought i'd make it count Ashamed

http://www.coolercases.co.uk/skull/2_skulltrail.jpg

http://www.coolercases.co.uk/skull/3_skulltrail.jpg

http://www.coolercases.co.uk/skull/4_skulltrail.jpg

http://www.coolercases.co.uk/skull/youtube.jpg

Eddie3dfx

12-16-2008, 06:13 PM

Coolermeister I absolutely have always loved the way you routed that tubing.. fantastic.
Even using the old school danger den barbs.. gotta score you some more points with that :)

Evil, that rig looks solid. Absolutely love the new mm cases..

RedRaider

12-16-2008, 06:20 PM

Coolmeister...

I've always loved that build...:slobber:

BTW, would you consider posting your buildlog here...:innocent: It's just a simple copy & paste, we both run vBulletin...:up:

zlojack

12-16-2008, 06:35 PM

Sweet build Coolmiester! Nice to see you over here at RRR.com!

Look forward to your participation in our community here.

That rig is a work of art. :up:

coolmiester

12-16-2008, 06:36 PM

Cheers Eddie / zlojack and sure i will R3 - i'll get on it right away :coolup:

Sniper

12-16-2008, 06:54 PM

Evil Love it! Can't wait to get my Pinnacle even more now!

CoolerMiester that's a sick sick build! You'll get a folder in my pics when you post the build here for sure! I love bad ass builds like that!

Some day some day haha.

Langer

12-16-2008, 07:12 PM

Hey Hey... Welcome Coolermeister. Glad to see you here.

coolmiester

12-16-2008, 07:32 PM

Hey, appreciate the kind words guys and thanks for the welcome - i hope i can out-do this build with the next one :)

Its a good looking forum so far i must admit :cool:

Snyxxx

12-16-2008, 08:01 PM

Glad to see you here as well coolmiester. Great job as usual.

Evil, I like your new build as well.

I also like the new MM tower cases, but wish they would raise the motherboard tray up some like the LL G70 like I am currently working on. I like having all the room at the bottom for mounting pumps and reservoirs.

cheapskate

12-17-2008, 06:33 PM

Everyone else has state of the art hardware.:crying:
Thanks for the warm welcome. The copper has it's downsides. I will have to re-solder the whole set if I ever upgrade, and I could never get them cleaned out completely.
'sup, coolmeister!

Baleful

12-17-2008, 06:39 PM

Oh man, evil and coolmiester..... very nice! I gotta step my game up :D

Infinity

12-18-2008, 07:04 AM

Some old pics, trying to rebuild this + going to dip those 4870's in water :D

http://farm4.static.flickr.com/3267/2890008756_db96deded7.jpg

http://farm4.static.flickr.com/3241/2890007624_4ded753939.jpg

I don't like the loop that much, kinda unsymmetrical for me.

ballz0r

12-18-2008, 07:11 AM

http://lh4.ggpht.com/_5JXSu5Gfgo4/SUpDPQBQ3rI/AAAAAAAABWE/pum-3KiZ1Ac/s800/DSC03558.JPG
http://lh5.ggpht.com/_5JXSu5Gfgo4/SRbh1hggazI/AAAAAAAABC0/oJGMHF-s0UE/s800/DSC03388.JPG
http://lh4.ggpht.com/_5JXSu5Gfgo4/SUkC2qosDaI/AAAAAAAABU4/JAJo7d-FPOY/s800/DSC03545.JPG

Infinity

12-18-2008, 09:53 AM

nice case, nice system, nice loop, nice model :D

bigslappy

12-18-2008, 10:07 AM

Like that Black Wrinkle Evil98 !!

bigslappy

12-18-2008, 10:09 AM

RedRaider

12-18-2008, 05:10 PM

NAekuh

12-18-2008, 05:14 PM

Need to clean up the wires... heres how far ive gone..

http://i125.photobucket.com/albums/p73/aigomorla/IMG_0158.jpg

http://i125.photobucket.com/albums/p73/aigomorla/IMG_0150.jpg

http://i125.photobucket.com/albums/p73/aigomorla/IMG_0152.jpg

Until i get my RMA from powercolor... :[
This is the first time in my history of H2Oing... that FUFUFUFUFUFUFUFU parts total count > all the other parts.. :rofl:
I have more FUFUFUFUFUFUFUFU on my system then i ever had...
http://i125.photobucket.com/albums/p73/aigomorla/IMG_0161.jpg

My return for the RAD -> Res
http://i125.photobucket.com/albums/p73/aigomorla/IMG_0155.jpg

Need to clean this up... but i ran out of room.. a DDC-3.2 was SUPOSED to fit in between:
http://i125.photobucket.com/albums/p73/aigomorla/IMG_0153.jpg

ROFL i should find FUFUFUFUFUFUFUFU stickers and put them on my mosfet and NB/SB block, so it matches everything...
Maybe i should ask dean for some...

Sniper

12-19-2008, 09:06 AM

Awesome Cable management & the use of Zip ties for holding the fans on your rads is Top Notch right there dude! Nice job! Also that stack of extenders is without a doubt the finishing touch on your build. Best is yet to come I hope Eh?

cheapskate

12-20-2008, 10:03 PM

The extreme use of orange zip ties actually works well. I see a few clear zip ties that need to go.

dingdong555

12-21-2008, 07:23 PM

Nice coils :)

http://i41.tinypic.com/sdfu42.jpg

Infinity

12-22-2008, 06:38 AM

generic case ftw?

http://farm4.static.flickr.com/3228/3127110367_cbceb3cdfc.jpg

http://farm4.static.flickr.com/3205/3127932926_11b3e2abea.jpg

http://farm4.static.flickr.com/3243/3128026064_edb73b333b.jpg

http://farm4.static.flickr.com/3289/3127792072_236cbbacf6.jpg

Septim

12-22-2008, 07:16 AM

hmm Infinity, sold the case already? or under modz...

Gir

12-22-2008, 01:35 PM

My Dual Loop tech station built by Syrillian. Name: The Paragon

Loops:

CPU Loop:

Fuzion V1 + Quad Nozzle + Custom brass mounting bracket

D5 Vario

MCR220 (BIX360 here in a week or two when Syrillian finishes the shroud/mount for it)

GPU/NB Loop:

MCW60 + D-Tek G92 Unisink

MCW30

D4

MCR220

http://i167.photobucket.com/albums/u151/Syrillian/TnB%20Build/40e52ca5.jpg

http://img1.hugeup.com/f/12222008/1463a30e.png

http://img1.hugeup.com/f/12222008/a853b9f0a7c0.png

RedRaider

12-22-2008, 01:52 PM

I've always loved your custom made case/rack, GIR...:slobber:

HESmelaugh

12-22-2008, 01:57 PM

Man, are there some sweet builds here!

I'll post some of mine once it's done and thereby make all the rest look so much better. :p

Gir

12-22-2008, 02:02 PM

I've always loved your custom made case/rack, GIR...:slobber:

Thanks RRR. :)

I designed it, but Syrillian made the dream come to life. He's a fantastic craftsman/artist.

Infinity

12-22-2008, 08:51 PM

@septim

it's at the modshop atm :)

@Gir

nice case and mounting for the dtek fuzion! what tubing + barbs are you using on that cpu block?

Gir

12-22-2008, 09:03 PM

@septim

it's at the modshop atm :)

@Gir

nice case and mounting for the dtek fuzion! what tubing + barbs are you using on that cpu block?

Primochill UV Blue 1/2 ID tubing and whatever barbs the fuzion comes with. :p

I don't have enough money to replace all the barbs in my system. I'm still using the plane jane plastic barbs on most of my parts.

Infinity

12-23-2008, 07:32 AM

@Gir

did you put any ties on the tube on the cpu block? or is it tight enough?

coolfris

12-23-2008, 08:29 AM

http://i41.tinypic.com/358qhdt.jpg

http://i39.tinypic.com/wv1g0j.jpg

http://i39.tinypic.com/snhzlu.jpg

http://i39.tinypic.com/v5wbc1.jpg

Will rebuild this one shortly. Pump go's to my MM build and will be replaced by a D5 with a DetoitAC top and the tubings are going to be 4 different colors :crack:
:)

Snyxxx

12-23-2008, 09:14 AM

I like your pump mounting system. Also, I see you go naked on your hose connections like I do. :p

Xilikon

12-23-2008, 09:19 AM

Here's mine (the picture was taken today with my new D60, hopefully better than the crappy flash pics I did before) :

http://i30.photobucket.com/albums/c338/Xilikon/Modding/DSC_0028.jpg
http://i30.photobucket.com/albums/c338/Xilikon/Modding/DSC_0030.jpg
http://i30.photobucket.com/albums/c338/Xilikon/Modding/DSC_00311.jpg

coolfris

12-23-2008, 10:11 AM

I like your pump mounting system. Also, I see you go naked on your hose connections like I do. :p

thanks!

R3400 3/8" tube on 1/2" barbs (....FTW ;)), pita to connect, but it realy looks nice and it's a very solid connection.
The pump mounting system is this thing (http://translate.google.com/translate?hl=nl&ie=UTF-8&u=http%3A%2F%2Fwww.aquatuning.de%2Fproduct_info.ph p%2Finfo%2Fp3779_Universal-Pump-mounting-socket----Eheim--Magicool--Laing-.html&sl=de&tl=en&history_state0=), a piece of alu with holes in it :p

Gir

12-23-2008, 10:25 AM

@Gir

did you put any ties on the tube on the cpu block? or is it tight enough?

I decided to try living life on the edge without clamps. I have plastic barbs on most of the components, which hold onto the tubing much better than metal barbs. Clamps just end up pissing me off too much when I try to get them off. :ROTF:

RedRaider

12-23-2008, 10:36 AM

Coolfris.... Nice clean build and I LOVE your Avatar...:2up:

@Xilikon...very nice case and amazing work...

Zeus

12-23-2008, 01:54 PM

Old pics, got a Rampage Extreme now:

http://img.photobucket.com/albums/v620/Z3us/computer/IMG_5075small.jpg

http://img.photobucket.com/albums/v620/Z3us/computer/IMG_5071small.jpg

http://img.photobucket.com/albums/v620/Z3us/computer/temp.jpg

Will post new pics when i have the Bitspower NB/SB block.

RedRaider

12-23-2008, 02:44 PM

Zeus...Very nice Armour...:slobber:

Zeus

12-25-2008, 05:54 AM

Thanks RRR, will repost as soon as i have rebuild it.

Chilly

12-26-2008, 02:32 AM

Heres mine, nothing special really except for the Silver Cather Storm G5.

http://img116.imageshack.us/img116/9990/pic0058jq4.jpg
http://img184.imageshack.us/img184/7706/pic0063nb1.jpg
http://img117.imageshack.us/img117/9103/pic0065qx6.jpg

Last, but not least, a picture of the fridge!

http://img381.imageshack.us/img381/4202/pic0057jk5.jpg

lightsabre

12-26-2008, 05:38 AM

My Cosmos GT-R

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/image001.jpg

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/teaserpic08.jpg

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/teaserpic06.jpg

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/teaser05.jpg

Sniper

12-26-2008, 08:09 AM

Nice to see you sign up Chilly! So if you ever want to let that Storm G5 go give me shout will ya? I'd love to add it to my started collection.

coolmiester

12-26-2008, 08:26 AM

Nice looking Cosmos lightsabre, the black and red is a sweet combo for sure :cool:

Septim

12-26-2008, 08:28 AM

do post some temps on that GT-R please...

ballz0r

12-26-2008, 11:04 AM

:cheers: nice fridge chilly

RedRaider

12-26-2008, 11:07 AM

@LightSaber.... I really like your choice of colors...:up:

Chicken Patty

12-26-2008, 12:59 PM

@ lightsabre

seen yours before somewhere, just can't remember, anyhow amazing rig :) A+!!!

lightsabre

12-26-2008, 03:22 PM

Nice looking Cosmos lightsabre, the black and red is a sweet combo for sure

thank you coolmiester! love your cosmos skulltrail project! awesome!

@LightSaber.... I really like your choice of colors...

thanks RRR. me and friend tantric conceptualized this project.he's one of the best modders here in the Philippines.

seen yours before somewhere, just can't remember, anyhow amazing rig A+!!!

thanks chicken patty! probably in Xs liquid cooling rigs hehehehehe tantric posted some photos there.

do post some temps on that GT-R please...

ok septim, here we go.....

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/mips01.jpg

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/teaserpic.jpg

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/teaserpic02.jpg

http://i20.photobucket.com/albums/b246/tantricmodz/cosmos%20GTR/mips02.jpg

happy holidays!

cheapskate

12-26-2008, 03:53 PM

I'm seeing some nice rigs here.
@Chilly - Beer and Crisco? You are hardcore... I'd be scared to pass out at one of your parties!

Chilly

12-26-2008, 04:37 PM

Nice to see you sign up Chilly! So if you ever want to let that Storm G5 go give me shout will ya? I'd love to add it to my started collection.

Pfft, I'm actually looking to add a 2nd one to my collection, just in case, I decided to go with a dual CPU system, or I ruin or break the other. They're hard as hell to find/buy, took a year of searching to get my first one. I almost had my hands on a 2nd one but the seller was scarred of the fact I was Canadian. :rolleyes:

As for the fridge, gotta always keep it stocked, for those unexpected parties :D

Believe it or not, its actually filled with food as well, most of the foods on the door, and in the drawers thou. :p

Sniper

12-26-2008, 04:40 PM

lol Red has one but I doubt he'll part with it easily if at all heheh. I'll find one someday i'm sure. I have a couple I want to add now so we'll see what happens.

Chicken Patty

12-26-2008, 04:46 PM

thanks chicken patty! probably in Xs liquid cooling rigs hehehehehe tantric posted some photos there.

No problem :up:

yeah i've followed the XS thread for a while, sure it was there. :)

Chicken Patty

12-27-2008, 06:00 PM

heres mine at the moment:

http://img.techpowerup.org/081227/P1150550resized.jpg

Night shot

http://img.techpowerup.org/081227/P1150563resized.jpg

Chicken Patty

12-28-2008, 02:46 AM

another shot of mine, what do you'll think?

http://img.techpowerup.org/081228/P1150567resized.jpg

Septim

12-28-2008, 06:45 AM

chicken patty who's the person holding your rig...

Chicken Patty

12-28-2008, 01:25 PM

chicken patty who's the person holding your rig...

Thats actually me, I was wiring the cables in the back while my buddy took the pic

mstrmold

12-29-2008, 03:04 AM

The ol' H2G0 now with two loops:
http://i79.photobucket.com/albums/j150/mstrmold/CIMG1959.jpg
http://i79.photobucket.com/albums/j150/mstrmold/CIMG1957.jpg
http://i79.photobucket.com/albums/j150/mstrmold/CIMG1958.jpg

Chicken Patty

12-29-2008, 07:12 AM

^^ tight, but looks good and does the job perfectly :up:

Chilly

12-30-2008, 03:45 AM

Just a couple "teaser" shots with my new camera! I posted the full rig before in this thread, but god, what a difference a decent macro shot can make to the appearance of your PC!

http://img168.imageshack.us/img168/2483/pcsmallxn4.png
http://img72.imageshack.us/img72/3671/pc4smallpt1.png

That said, even the best camera in the world can't hide the dust :haha:

bundymania

12-30-2008, 07:23 AM

Hi Guys, a "little" collection of my rigs and H2O Stuff :D :

http://www.abload.de/img/img_5911ocfm.jpg

http://www.abload.de/img/img_0011wht.jpg

http://www.abload.de/img/img_0027ywp.jpg

http://www.abload.de/img/img_0253utu.jpg

http://www.abload.de/img/img_02831pb.jpg

http://www.abload.de/img/img_0308o3y.jpg

http://www.abload.de/img/img_031585n.jpg

http://www.abload.de/img/img_0363dem.jpg

http://www.abload.de/img/img_0445yhl.jpg

http://www.abload.de/img/img_04979yo.jpg

http://www.abload.de/img/img_0554sra.jpg

http://www.abload.de/img/img_0608juv.jpg

http://www.abload.de/img/img_078467l.jpg

http://www.abload.de/img/img_0840yzh.jpg

http://www.abload.de/img/img_09989bz.jpg

http://www.abload.de/img/img_1107n7o.jpg

http://www.abload.de/img/img_1189kpg.jpg

http://www.abload.de/img/img_1610hl9.jpg

http://www.abload.de/img/img_20043ix.jpg

http://www.abload.de/img/img_2098s4z.jpg

http://www.abload.de/img/img_2190xjf.jpg

http://www.abload.de/img/img_2320ltn.jpg

http://www.abload.de/img/img_2447lom.jpg

http://www.abload.de/img/img_2549rqs.jpg

http://www.abload.de/img/img_2631uom.jpg

http://www.abload.de/img/img_26340td.jpg

http://www.abload.de/img/img_2849evm.jpg

http://www.abload.de/img/img_2870fjw.jpg

http://www.abload.de/img/img_2918ty0.jpg

http://www.abload.de/img/img_30545j0.jpg

http://www.abload.de/img/img_3060vbl.jpg

http://www.abload.de/img/img_3453mwd.jpg

http://www.abload.de/img/img_3501cgt.jpg

http://www.abload.de/img/img_3608eio.jpg

http://www.abload.de/img/img_07492in.jpg

http://www.abload.de/img/127-2758_img_2ap7.jpg

http://www.abload.de/img/doppel-agbn69.jpg

http://www.abload.de/img/g80_goldue6.jpg

http://www.abload.de/img/oclabs-laingud7.jpg

http://www.abload.de/img/redtest5mp6.jpg

http://www.abload.de/img/zern1kjl.jpg

http://www.abload.de/img/img_24927nd.jpg

http://www.abload.de/img/img_2505sua.jpg

http://s7.directupload.net/images/080811/ag6aaaqb.jpg (http://www.directupload.net)

http://www.abload.de/img/img_430366x.jpg

http://www.abload.de/img/img_3609mqj.jpg

http://www.abload.de/img/img_3943zmn.jpg

http://www.abload.de/img/img_4389xyg.jpg

http://www.abload.de/img/img_4448r0e.jpg

@ballzOR: nice adaption of my plexi graka mod ;)

Chicken Patty

12-30-2008, 07:23 AM

@ CHILLY AND BUNDYMANIA looking good GUYS :up:

bundymania

12-30-2008, 07:50 AM

some more banchetto 101 pics :)

http://www.abload.de/img/img_5911ocfm.jpg

http://www.abload.de/img/img_5906xh47.jpg

http://www.abload.de/img/img_5913z5hn.jpg

http://www.abload.de/img/img_5914n9b6.jpg

http://www.abload.de/img/img_5920ib4m.jpg

Baleful

12-30-2008, 08:13 AM

Bundy, I'm a big fan! Thanks for posting these, you always have some of the cleanest looking builds.

bundymania

12-30-2008, 08:18 AM

thanks ! :)

Sniper

12-30-2008, 09:47 AM

Bundy dude Awesome! Might I suggest posting the hardware pics in here as well to please? Seeing as it's a more appropriate place for them & I think they deserve to be there to lol.

HARDWARE PRONZ! (http://www.realredraider.com/vbulletin/showthread.php?t=145)

RedRaider

12-30-2008, 10:46 AM

Bundy....

Fucking "A" nice bro....:slobber: :2up:

Snyxxx

12-30-2008, 10:47 AM

Bundy, wow! That is some very nice tube routing and what a clean build. Keep up the good work and great pictures.

bundymania

12-30-2008, 10:56 AM

thanx dudes !

@Sniper: Done - and "a few" new pics :D

ibm390s

01-04-2009, 03:09 PM

loop1-pump-360-240-cpu0-NB-res-pump
loop2-pump-360-240-cpu1-SB-res-pump

http://i33.tinypic.com/2nc0vpv.jpg

http://i36.tinypic.com/8zo2f4.jpg

http://i38.tinypic.com/34qr40n.jpg

bentleya

01-04-2009, 03:12 PM

i'm a sucker for skulltrial :) good job

RedRaider

01-04-2009, 05:26 PM

Nice IBM...:D

mcoffey

01-04-2009, 05:34 PM

loop1-pump-360-240-cpu0-NB-res-pump
loop2-pump-360-240-cpu1-SB-res-pump

Damn nice job and thanks for posting. Congrats on a great build.

andyc

Metal

01-04-2009, 08:58 PM

Awesome color ibm! I like it!

ibm390s

01-05-2009, 12:21 PM

it's not finished yet. just received a Asus RIIE and a 965. Mounted the board on the Dimas benchtable and next week i'll start ordering parts for the loops.

Final config:

loop1 - pump-rad360-cpu-pump (pump laing ultra with XSPC top+reservoir connected directly to the res using a variable SLI fitting)
loop2 -pump-rad240-MIPS-NB+SB-Mosfet1-Mosfet2-pump (pump laing ultra with XSPC top+reservoir connected directly to the res using a variable SLI fitting)

This setup will be prepared for DICE and LN2 sessions also so i need to tear it appart when the armaflex arrive and start mounting the insulation. For daily use watercooling will be used, for bench sessions i'll remove the WB on the cpu and install a LN2 Pot (which is at the milling shop right now). Still try to figure out a mounting method, i have something in my mind but for the moment i don't really have time to draw it and cut it.

1. Preparing the benchtable

http://i39.tinypic.com/29cukns.jpg

http://i41.tinypic.com/2wbs1i1.jpg

2. New mounting for stock cooler

http://i41.tinypic.com/352m0k1.jpg

3. CPU installed

http://i39.tinypic.com/2llehd3.jpg

4. Startup

http://i41.tinypic.com/2wn5mo3.jpg

5. Better airflow (Delta AFB1212SH on cpu and JMC/DATECH 1238-12HBTA-4 on 98oo GX2)

http://i39.tinypic.com/25fsj9i.jpg

6. Overall picture

http://i41.tinypic.com/mmbzg9.jpg

a small question to the pro's. What do you think about connecting the pump to the rad using a SLI fitting? Is it able to support the weight of the pump+res+water or i need to make a plate to support the pump?

P.S

a rendered image of the custom case in the devel phase (Design made in Solidworks)

http://i44.tinypic.com/jr776x.jpg

cheapskate

01-05-2009, 02:09 PM

Nice gear. I'd say any pump would need support just to be on the safe side. The vibration of the pump will transfer to the radiator and into the case, so it might be a little louder than if you isolated it with hoses.

HESmelaugh

01-05-2009, 02:12 PM

Nice Setup!

Use a plate for the pump. Some SLI-connectors are done push-in style so the pump could just slip off if it's just hanging there.
Even if that's not the case, I wouldn't want to put that kind of strain (plus vibration from the pump) on a thread for an extended period of time.

ibm390s

01-05-2009, 02:44 PM

good point. sound level is not my main concern, but both of you are right regarding the vibrations induced by the pump. i'll do a small bracket which will be fixed on the outside panels because i intend to install the rads in reverse and using a punch tool drill holes for the fittings. like this the rads will be inside only the vents will be mounted outside pulling the air trough the radiator (both of the rads will be BlackIce GTX).

zlojack

01-06-2009, 03:28 PM

Here are some shots of mine so far. The rest of the build log is in the link in my sig. I will be adding the vreg and nb/sb to the GPU loop in the future, as well as another card or two :D

http://img.photobucket.com/albums/v391/zlojack/DSC02382.jpg

http://img.photobucket.com/albums/v391/zlojack/DSC02395.jpg

http://img.photobucket.com/albums/v391/zlojack/DSC02385.jpg

http://img.photobucket.com/albums/v391/zlojack/DSC02380.jpg

http://img.photobucket.com/albums/v391/zlojack/DSC02377.jpg

RedRaider

01-06-2009, 03:31 PM

I like the sleeving ZloJack....:slobber:

zlojack

01-06-2009, 03:33 PM

I like the sleeving ZloJack....:slobber:

Thanks! :)

I'm pretty happy with the way it turned out. Of course, now I have to remount the CPU block, so I might have to mess with the sleeving :(

Langer

01-06-2009, 05:19 PM

Nice sleeving ;) - and I'm quite partial to sleeved tubing myself.

What kind of sleeve did you use?

zlojack

01-06-2009, 08:08 PM

Nice sleeving ;) - and I'm quite partial to sleeved tubing myself.

What kind of sleeve did you use?

I don't know the brand, but I got it from Sidewinder computers. By far the best quality. I couldn't get all sizes, so I used a mix of that and some stuff from PPCs, but for the tubing, it's great sleeving, for sure.

Septim

01-06-2009, 10:32 PM

yep definitely nicely sleeved tubing...

cheapskate

01-07-2009, 05:02 PM

Your hands must be tiny.:hehe:

zlojack

01-07-2009, 05:03 PM

Your hands must be tiny.:hehe:

Actually, they're big....it's huge PITA to work in small places. And if you drop a screw...forget about it! I have to get my wife to help reach for it :D

bentleya

01-07-2009, 05:08 PM

Them tubes are amazing work :) just think it may of looked better with fat boys :coke::moon:

Chicken Patty

01-08-2009, 05:27 PM

^^^ nice skulltrail, the i7 on air rig looked pretty nice,

and zlojack, that sleeving is great dude :up:

razar

01-09-2009, 09:09 AM

Here's my old system.....I'm currently building a Rocketfish to put all components internal as much as possible.
http://farm3.static.flickr.com/2290/2527310831_e94d46b4e6_o.jpg

Snyxxx

01-09-2009, 09:29 AM

Here's my old system.....I'm currently building a Rocketfish to put all components internal as much as possible.

I think the Rocketfish is similar to my G70. I like an all internal build as well and documented it here:

http://www.realredraider.com/vbulletin/showthread.php?t=1834

Zeus

01-09-2009, 10:23 AM

Updated pics of my rig.

http://img.photobucket.com/albums/v620/Z3us/computer/case3.jpg

Ccfl's off:

http://img.photobucket.com/albums/v620/Z3us/computer/case.jpg

Almost there, have to find a way to hide the wire for the watertempsensor in the res but it's too short. :(

Chicken Patty

01-09-2009, 06:46 PM

^^ looks good bro, just attach some more wire to the temp sensor and run it somewhere else :D

Jtrain

01-09-2009, 09:15 PM

@ Lightsabre-That build is sweet!!!!
Very nice builds from every1 so far!
I've pretty much seen build logs for almost all of these builds already though and they still look amazing. :-)
Keep up the good work guys!!

Zeus

01-10-2009, 04:04 AM

^^ looks good bro, just attach some more wire to the temp sensor and run it somewhere else :D

Well one side is attached to the sensor and the other end goes straight into the display.

I don't know if cutting the wire and putting some lenght in between will harm accuracy of the reading.

Chicken Patty

01-10-2009, 12:14 PM

Well one side is attached to the sensor and the other end goes straight into the display.

I don't know if cutting the wire and putting some lenght in between will harm accuracy of the reading.

I dont think so, I mean you dont have to add much more I would say.

Chicken Patty

01-21-2009, 12:25 AM

Well the i7 is finally going to have some good cooling. Got my parts today from Sidewinders.

List:
HW Labs GTX 480 Rad
Swiftech MCP 655 Pump
EK 250 Res
4 Scythe 2000RPM Fans
10ft of Clear 7/16th tubing

All the Parts Packaged
http://img.techpowerup.org/090121/P1150709resized.jpg

Radiator
http://img.techpowerup.org/090121/P1150710resized.jpg
Rad in front of Thermal take Armour +
http://img.techpowerup.org/090121/P1150711resized.jpg

Pump
http://img.techpowerup.org/090121/P1150715resized.jpg

Reservoir
http://img.techpowerup.org/090121/P1150714resized.jpg
Fittings
http://img.techpowerup.org/090121/P1150712resized.jpg
Fans
http://img.techpowerup.org/090121/P1150716resized.jpg
Fan Sleeving by Gary @ Sidewinders, great job!!!!
http://img.techpowerup.org/090121/P1150717resized.jpg

Cutless009

01-21-2009, 12:54 AM

lookin good chicken, what block are you using for your i7?

Chicken Patty

01-21-2009, 01:09 AM

lookin good chicken, what block are you using for your i7?

Thanks. I'm doing the install tomorrow so i'll post more pics then.

Swiftech Apogee GTZ

Chicken Patty

01-21-2009, 09:56 PM

ok guys here you go:

http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150718resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150719resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150720copyreszied.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150724resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150724resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150730RESIZED.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150731resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150732resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150733resized.jpg

bundymania

01-22-2009, 07:54 AM

http://www.abload.de/img/whitedition2cuj9.jpg

http://www.abload.de/img/whitedition36mfo.jpg

http://www.abload.de/img/whitedition8ouxa.jpg

:D

Septim

01-22-2009, 08:29 AM

hmm black and white cooling... looks good...

RedRaider

01-22-2009, 10:29 AM

BundyMania.....

That thing is a fucking beast...:wth:

RedRaider

01-22-2009, 10:29 AM

Chickenpatty....

Sweet build...:up:

Sniper

01-22-2009, 12:03 PM

Damn Bundy that thing is sweeet in white!!!

Chickenpatty lookin good dude!

Chicken Patty

01-22-2009, 05:03 PM

[please dont quote pics]:oops:

:D

oh man that rad is a monster, and it looks beautiful!!!!! :up:

Chickenpatty....

Sweet build...:up:

THanks bro, i'm very happy with it overall, got my stuff from Gary, I know i've seen you'll talking about him round here, service was good, stuff came really well packaged.

Damn Bundy that thing is sweeet in white!!!

Chickenpatty lookin good dude!

I agree with the white rad, and thanks bro. Like I just said yo red raiders quote, very happy with the products.

Chicken Patty

01-22-2009, 07:12 PM

Took some better pics, fixed the block orientation, cleaned the rad how FIT told me yesterday, and made my own little fill port :D

http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150741resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150742resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150744resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150746resized.jpg

Fill Port
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150748resized.jpg

Mankz

01-23-2009, 11:31 AM

http://i49.photobucket.com/albums/f266/Mankz_91/3-8.jpg

My first... :p

http://i49.photobucket.com/albums/f266/Mankz_91/DSCF2898.jpg

And then same case, different hardware.

breezyjr

01-24-2009, 09:48 AM

Took some better pics, fixed the block orientation, cleaned the rad how FIT told me yesterday, and made my own little fill port :D

http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P1150741resized.jpg

I kind of don't understand the idea of having that HUGE rad hanging off the back of your case, for "just" the CPU?????

Isn't there room in the case for a triple rad, or even just a triple rad on the back would look less..... Ummmmm...."off balance" In fact, it even looks like the back of the case is buckling under the stress of the rad. I looks as though some day, the screws will give out, and the rad will fall off.....

Otherwise, everything looks nice.... :up:

Joe_Breezy

razar

01-24-2009, 10:59 AM

My most recent update......Which odly enough is about to get an overhaul and I'm not even done with the original vision. An artists work is never complete.
http://farm4.static.flickr.com/3401/3223055998_4e8be1e290_o.jpg

Baleful

01-24-2009, 11:19 AM

Nice razar, I love the color scheme!

Chicken Patty

01-24-2009, 12:37 PM

I kind of don't understand the idea of having that HUGE rad hanging off the back of your case, for "just" the CPU?????

Isn't there room in the case for a triple rad, or even just a triple rad on the back would look less..... Ummmmm...."off balance" In fact, it even looks like the back of the case is buckling under the stress of the rad. I looks as though some day, the screws will give out, and the rad will fall off.....

Otherwise, everything looks nice.... :up:

Well as weird as it may sound the Core i7 needs that kind of cooling, it can even use more!!!! Have you seen FITS build for his i7???

Anyhow, it is very stable back there, the case its not buckling at all. The case can only fit a single rad at the back, or top, or a dual fan rad at the bottom, I tried cooling the i7 with a 120.2, total failure!!!!

Thanks anyways bro, I take advise whether its good or bad :up:

Joe_Breezy

My most recent update......Which odly enough is about to get an overhaul and I'm not even done with the original vision. An artists work is never complete.
[please dont quote pics]:oops:

That is indeed beautiful :D

FrostByte

01-24-2009, 02:31 PM

man, i hate to even think about posting pics of my first attempt water cooling from over a year ago on here. But might as well. Further down you go on the pictures, the older they were. So freaking sloppy.

http://i18.photobucket.com/albums/b115/Fizur/100_0722.jpg

http://i18.photobucket.com/albums/b115/Fizur/100_0721.jpg

http://i18.photobucket.com/albums/b115/Fizur/100_0723.jpg

http://i18.photobucket.com/albums/b115/Fizur/casefinaloverall.jpg

Chicken Patty

01-24-2009, 05:04 PM

hey man we all start somewhere dude :D

FrostByte

01-24-2009, 09:22 PM

i do have a nice picture of all my WC parts i had when i made my order.

http://i18.photobucket.com/albums/b115/Fizur/100_0681.jpg

http://i18.photobucket.com/albums/b115/Fizur/100_0680.jpg

http://i18.photobucket.com/albums/b115/Fizur/100_0679.jpg

Baleful

01-24-2009, 09:28 PM

Hey man, just like Chicken Patty said, we all start somewhere. I don't have any pics of my first attempt, but it wasn't any better lol.

Chicken Patty

01-24-2009, 09:32 PM

i do have a nice picture of all my WC parts i had when i made my order.

[please dont quote pics]:oops:

damn nice gear!!!
Hey man, just like Chicken Patty said, we all start somewhere. I don't have any pics of my first attempt, but it wasn't any better lol.

THanks :up: My first attemp ws not great neither, but i tried and i think my 2nd one now was pretty darn good.

bundymania

01-29-2009, 07:13 AM

Hey Guys, check this little beauty queen :D

http://farm4.static.flickr.com/3435/3236978952_16284c4eb4_o.jpg

german engineering ftw :)

BiNGE

01-29-2009, 07:19 AM

http://img.techpowerup.org/090129/DSCF0349.jpg
http://img.techpowerup.org/090129/DSCF0362.jpg
http://img.techpowerup.org/090129/DSCF0363.jpg

Langer

01-29-2009, 09:23 AM

Hey Guys, check this little beauty queen :D

http://farm4.static.flickr.com/3435/3236978952_16284c4eb4_o.jpg

german engineering ftw :)

Did you nickel plate your Heatkiller?

Damn that's sexy.

Xilikon

01-29-2009, 09:42 AM

Me want the nickel plated version !!!!

Langer

01-29-2009, 09:48 AM

It's not a factory option.

Xilikon

01-29-2009, 09:50 AM

It's not a factory option.

I know and it's sad :( Any good place for nickel plating in Canada ?

Langer

01-29-2009, 09:56 AM

I use Sun Polishing & Plating Co Ltd (http://www.sunpolishing.ca/base.html) outside of Toronto, a bit pricey but they are very skilled aesthetic chromers.

alejo

01-29-2009, 10:21 AM

Nickel-plated HK? Nice!

FrostByte

01-29-2009, 11:10 AM

man, thats a really nice block there, wish i could get those, but will have to wait for that.

Chicken Patty

01-29-2009, 05:20 PM

:D :D :D

http://img140.imageshack.us/img140/6651/p1150744resizedvp9.jpg (http://imageshack.us)

Chicken Patty

01-29-2009, 05:24 PM

@ bundymania

thats a sick block dude.

bundymania

01-29-2009, 05:37 PM

Thx Guys ! Yep, it´s nickel plated , so it fits well to my mips waterblock Set for the DFI DK X38 Board :)

My helping hands :

http://www.abload.de/thumb/img_22083p2e.jpg (http://www.abload.de/image.php?img=img_22083p2e.jpg)

:D

Baleful

01-29-2009, 06:41 PM

LOL Bundy, my wife saw that and was "Awwww look at the bunnies!!" ha. Hehe, we eat those here, rabbit hunting is fun.

bundymania

01-29-2009, 06:47 PM

look at this, the boss of my rabbit gang can speak a little bit on command :D

http://de.youtube.com/watch?v=WTRpiIbpoMo&feature=channel_page

Langer

01-29-2009, 06:56 PM

lol... it looks pissed. haha

Baleful

01-29-2009, 07:01 PM

lmao that's great... though I have no idea wtf you said :D

bundymania

01-29-2009, 07:47 PM

i ask the rabbitgirl something like: are you my cheeky buddy and she goes like: yeaaaah :D

Baleful

01-29-2009, 07:54 PM

i ask the rabbitgirl something like: are you my cheeky buddy and she goes like: yeaaaah :D
:ROTF: lol that's great... but now my wife wants one...

Langer

01-29-2009, 08:11 PM

Get a GIANT one...

Giant Bunny

Baleful

01-29-2009, 09:23 PM

We have rabbits here the size of that first one that he was giving the water to, but that last one...:slobber: serious pot of rabbit stew right there.

lyl

01-31-2009, 07:01 PM

heres a low-res pic of my system as it runs right now... still working on it, then ill take some decent pics.

:)

Chicken Patty

01-31-2009, 09:22 PM

heres a low-res pic of my system as it runs right now... still working on it, then ill take some decent pics.

:)

looks good bro :up:

keep us posted :)

zlojack

01-31-2009, 09:52 PM

I use Sun Polishing & Plating Co Ltd (http://www.sunpolishing.ca/base.html) outside of Toronto, a bit pricey but they are very skilled aesthetic chromers.

I was looking at them, Langer.

I'm thinking about nickel-plating my Heatkiller and my RAM Freezer (when I get it).

Are they worth it? What are the costs like for a job like that?

Cutless009

01-31-2009, 10:31 PM

hey man that looks great, what case is that and what did you have to do to get it to run reverse atx?

lyl

02-01-2009, 09:53 PM

its a V1000B. its a rATX case

Baleful

02-02-2009, 10:06 PM

Just put everything back together, I'll have to get a better pic this weekend when there's better light. It's alot cleaner than this too, this angle is just bad.

http://i604.photobucket.com/albums/tt121/Liquid_Bale/CIMG1310.jpg

I'll also be breaking the loop back down. After bleeding, i noticed a little black thing floating through the loop...

http://i604.photobucket.com/albums/tt121/Liquid_Bale/CIMG1307.jpg

The fucking gasket came out of the fuzion..... can't wait for the HK's!

bundymania

02-05-2009, 07:15 AM

http://www.abload.de/img/img_63247tm0.jpg

http://www.abload.de/img/img_63302fpu.jpg

http://www.abload.de/img/img_63153nkk.jpg

http://www.abload.de/img/img_6350sc0s.jpg

Chicken Patty

02-05-2009, 04:51 PM

what card is that FUFUFUFUFUFUFUFU block for? That looks great!

grumpy

02-05-2009, 05:05 PM

what card is that FUFUFUFUFUFUFUFU block for? That looks great!
I believe it is the GTX 295 block.

Langer

02-05-2009, 05:09 PM

http://img.photobucket.com/albums/v60/Langer/misc/FUFUFUFUFUFUFUFU-deduction-1.jpg

haha, couldn't resist.

Chicken Patty

02-05-2009, 05:20 PM

^^^thanks, block looks really good :up:

Baleful

02-05-2009, 05:37 PM

LOL @ Langer

bundymania

02-05-2009, 05:50 PM

I believe it is the GTX 295 block.

yeah, right :) btw: a blue led modul is also included ftw

http://www.abload.de/img/img_6307plt5.jpg

Chicken Patty

02-17-2009, 10:31 AM

better quality shots

http://img.techpowerup.org/090217/_2172597edited.jpg

http://img.techpowerup.org/090217/_2172601edited.jpg

http://img.techpowerup.org/090217/_2172603edited.jpg

kgd1

02-17-2009, 09:10 PM

Hello Guys this is my first post.:D Just wanted to share some pics my W/C setup.
385

386

387

388

389

Chicken Patty

02-17-2009, 10:31 PM

that looks pretty good bro :up: Welcome to RRR

breezyjr

02-18-2009, 06:57 AM

3 rads... ONE loop... interesting....

Joe_Breezy

kgd1

02-18-2009, 09:20 AM

3 rads... ONE loop... interesting....

Joe_Breezy

Is there something wrong with that set up? Please let me know.:p

bundymania

02-18-2009, 12:02 PM

http://www.abload.de/img/img_6512t4va.jpg

breezyjr

02-18-2009, 12:24 PM

Is there something wrong with that set up? Please let me know.:p

Nope... Just interesting... used to seeing multiple loops with multiple rads...

If it works... go for it... :up:

Joe_Breezy

Fitseries3

02-21-2009, 01:29 PM

here is my dell perc 5/i i just got running on water...

http://forums.techpowerup.com/attachment.php?attachmentid=23123&stc=1&d=1235243465

http://forums.techpowerup.com/attachment.php?attachmentid=23124&stc=1&d=1235243516

http://forums.techpowerup.com/attachment.php?attachmentid=23125&stc=1&d=1235243557

Kayin

02-21-2009, 01:34 PM

Fits, that's amazing. Absolutely beautiful.

bentleya

02-21-2009, 02:17 PM

Fits, so i'm guessing you don;t need me to design a block for that now?

Chicken Patty

02-21-2009, 02:18 PM

great job fit!! :up:

Fitseries3

02-21-2009, 02:19 PM

Fits, so i'm guessing you don;t need me to design a block for that now?

you can if you want. it would be nice to find a way to add this to my 7/16" loop

bundymania

02-25-2009, 01:07 PM

Worldpremiere :)

http://www.abload.de/img/img_6706ghhk.jpg

http://www.abload.de/img/img_6731gjhq.jpg

http://www.abload.de/img/img_6737pfjv.jpg

zlojack

02-25-2009, 01:09 PM

Nice pics, Bundymania! Now open it up and let us see the guts! :D

bundymania

02-25-2009, 01:58 PM

Yellowstone Internals ;)

http://www.abload.de/img/img_6744msb0.jpg

http://www.abload.de/img/img_6750wyvv.jpg

Langer

02-25-2009, 05:30 PM

Is the copper portion cast or is it just bead blasted billet copper?

bundymania

02-25-2009, 05:47 PM

Lid / nozzle combination of full metal brass

Electrolyte copper base plate with Pin-structure (Pin-surface covers CPU core completely) with highly level ground side, Pin-structure bead blasted

http://www.alphacool.com/shop/CPU-Kuehler/Kuehler-mit-Halterung/Sockel-1366/Alphacool-HF-14-Yellowstone-Sockel-775-1366-1160--5771.html?XTCsid=e7e844f2ba0b463f060091b4ff530e97

HESmelaugh

02-25-2009, 05:53 PM

(Do you think the bead-blasting is an actual advantage? I mean, I can see how it theoretically increases surface area, but would it be significant?)

EDIT: Actually, this is the wrong thread for this. I'll post this question in the thread for this waterblock.

yeow_z

02-25-2009, 07:02 PM

my first post

http://images.yeowcruise.multiply.com/image/1/photos/5/600x600/10/IMG-5801.JPG?et=5GbCNs0NkRNgrVwVkwtD5w&nmid=202109939

http://images.yeowcruise.multiply.com/image/3/photos/5/600x600/1/IMG-5746.JPG?et=PajTSeeiMx0p3JlXxur82g&nmid=202109939

http://images.yeowcruise.multiply.com/image/2/photos/5/600x600/5/IMG-5775.JPG?et=qN%2CSP82tGmJvJXkNaZ1ZHg&nmid=202109939

yeow_z

02-25-2009, 07:04 PM

more

http://images.yeowcruise.multiply.com/image/2/photos/5/600x600/6/IMG-5785.JPG?et=T%2BjWcX6BqbykDNDuTrEXpw&nmid=202109939

http://images.yeowcruise.multiply.com/image/2/photos/5/600x600/3/IMG-5760copy.jpg?et=UDUtQGUAqcvxShIaC4OLKA&nmid=202109939

http://images.yeowcruise.multiply.com/image/1/photos/5/600x600/8/IMG-5771.JPG?et=21xOBe%2BCxHpjzRhy16OiWA&nmid=202109939

http://images.yeowcruise.multiply.com/image/2/photos/5/600x600/7/IMG-5788.JPG?et=NwZ%2C4fbOC18yjLJDxszb%2CQ&nmid=202109939

zlojack

02-25-2009, 07:07 PM

More please! :D

yeow_z

02-25-2009, 07:14 PM

More please! :D

:D ill add more some other time, a bit lazy..:p

zlojack

02-25-2009, 07:15 PM

:D ill add more some other time, a bit lazy..:p

Cool. It's a great-looking rig! Have you got a rad in the front as well?

yeow_z

02-25-2009, 07:21 PM

Cool. It's a great-looking rig! Have you got a rad in the front as well?

yup! 360 rad:)

TedShred

02-25-2009, 07:21 PM

Man that's nice! Love the yellow touches on the mobo.:coolup:

Chicken Patty

02-25-2009, 09:59 PM

yeow_z

that looks great bro :up:

yeow_z

02-26-2009, 12:04 AM

yeow_z

that looks great bro :up:

tnx man!!:)

HESmelaugh

02-26-2009, 12:39 AM

Wow, great build, yeow_z!
I especially like that first pic on this page. :up:

RedRaider

02-26-2009, 05:35 AM

Yeow....

Nice looking build..:up:

The sleevingvlooks great...

yeow_z

02-26-2009, 05:51 PM

more pics here! (http://www.realredraider.com/vbulletin/showthread.php?t=4388)

wire management still undone. lazy mode. lol

bundymania

02-27-2009, 09:27 AM

http://www.abload.de/img/img_68811277.jpg

Chicken Patty

02-27-2009, 06:17 PM

^^^sweet, got a more complete picture of the setup?

bundymania

02-27-2009, 06:57 PM

just a quick snapshot at 1:56 a.m. :D

http://www.abload.de/img/img_68874q1x.jpg

RedRaider

02-27-2009, 07:05 PM

nice test bench...:)

Chicken Patty

02-27-2009, 07:09 PM

thanks bundy, nice little test bench

Chicken Patty

02-27-2009, 08:32 PM

you'll like my custom RAM cooler :D

http://img.techpowerup.org/090227/Capture089.jpg

Chicken Patty

02-28-2009, 08:05 PM

what do you'll think about the cable management

The two PCI-E connectors to the right of the pump are now connected to the 2nd card. Everything comes out of the hole in the mobo tray and connects to where it goes. I dont think it'll get better unless I can sleeve the wires, but eff that, too much work.

http://img.techpowerup.org/090228/_2262643resized.jpg

bundymania

03-06-2009, 07:12 AM

news from Bella Italia:

http://www.abload.de/img/img_6937500j.jpg

Tests on S775 & S1366 in the near future, stay tuned :)

Baleful

03-06-2009, 07:19 AM

what do you'll think about the cable management

The two PCI-E connectors to the right of the pump are now connected to the 2nd card. Everything comes out of the hole in the mobo tray and connects to where it goes. I dont think it'll get better unless I can sleeve the wires, but eff that, too much work.

Looks good man, I think your sleeving looks good. For the people that have time to sleeve all their cables with MM packs and all that, well Kudos to you, it looks good but it's not for everyone.

bundymania

03-06-2009, 07:31 AM

http://www.abload.de/img/img_6965g9ir.jpg

http://www.abload.de/img/img_6950cxcs.jpg

http://www.abload.de/img/img_6970urhu.jpg

http://www.abload.de/img/img_6974uyzg.jpg

ballz0r

03-06-2009, 08:16 AM

whats that bundy?

(by the way.... are u named after my favorite rum?:))

Cutless009

03-06-2009, 08:32 AM

mmmmm rummmmmmmmm. Why is the rum always gone?

bundymania

03-06-2009, 08:40 AM

whats that bundy?

(by the way.... are u named after my favorite rum?:))

not really :D i´m a fan of the tv series mwc

more about the italian waterblock here:

http://www.ybris-cooling.it/product_info.php?cPath=140&products_id=1342&osCsid=0a6f1b242b233dfcdaf11aad9be5586c

Chicken Patty

03-06-2009, 06:08 PM

Looks good man, I think your sleeving looks good. For the people that have time to sleeve all their cables with MM packs and all that, well Kudos to you, it looks good but it's not for everyone.

Thanks bro :)

actually I have done no sleeving, the sleeving is what ever came with the components. Sleeving is too much time I say, although it does looks spectacular :)

Chicken Patty

03-08-2009, 07:29 PM

no changes for me, just uv lights, notice the tubing is greener now and the rig itself is not as lit up, much less blue in the picture

http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3082706.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3082711.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3082713.jpg

Chicken Patty

03-11-2009, 05:48 PM

Got my BP 45's installed, looks so much cleaner with shorter tubing.

http://img.techpowerup.org/090311/P3092763resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3092755resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3092758resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3092760resized.jpg
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3092762resized.jpg

Chicken Patty

03-12-2009, 11:18 PM

dont remember posting this here. What do you guys think?

Comparison before and after BP fittings

BEFORE:
http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3082713.jpg

AFTER

http://i599.photobucket.com/albums/tt72/ChickenPatty_01/P3092755resized.jpg

bundymania

03-17-2009, 08:09 AM

http://www.abload.de/img/img_7074osgw.jpg

http://www.abload.de/img/img_7078vrjj.jpg

http://www.abload.de/img/img_7083zplf.jpg

http://www.abload.de/img/img_7097lu78.jpg

http://www.abload.de/img/img_7108czjs.jpg

http://www.abload.de/img/img_7121oqj1.jpg

zlojack

03-17-2009, 08:09 AM

Nice block!

Nickel plating?

bundymania

03-17-2009, 08:29 AM

maybe later, because i also got the EK and FUFUFUFUFUFUFUFU block and they´re already nickel plated :) stay tuned for a review

Chicken Patty

03-17-2009, 12:05 PM

awesome bundy!!!!!

yeow_z

03-24-2009, 01:56 AM

http://images.yeowcruise.multiply.com/image/1/photos/5/600x600/19/IMG-5898.JPG?et=ydsqx3cYbN6yuuwHQP6FPg&nmid=202109939

Ebdain

03-26-2009, 08:50 PM

First time reader, first time poster, first time water-cooler.
(Virgin? what?)

Here's my first go at it. Mistakes were made, pumps were destroyed, etc.:
http://www.ebdain.com/i7/after.jpg

RedRaider

03-26-2009, 09:01 PM

Ebdain...

:welcome2: to RedRaider Technology.

Great work for your first loop...:2up:

Cutless009

03-28-2009, 04:30 PM

Dropped in my T12W 1200watt PCP&C PSU, all new wiring management of course. Ironically this looks way cleaner than it did with the modular psu I had in there. Modular what? WHO CARES. Cleaner this way anyways.

http://i188.photobucket.com/albums/z6/Cutless1/New_PSU-1.jpg

Considering the following:

Holes in MB Tray for USB/Adio headers and SATA cables.
Taking it apart and painting it all black (wouldnt take much its all bolted together when necessary to take it apart for painting)

Only problem with either of these is I cant afford for this rig to be down more than an hour or two at a time, so painting is definitely out for now, the holes could probably happen with it all staying together.

em1r

03-28-2009, 04:58 PM

My old(lame:D) rig, i'll take some new pics next week.

http://img255.imageshack.us/img255/9086/61302023ta5.jpg

http://img255.imageshack.us/img255/5981/95290674wp6.jpg

http://img147.imageshack.us/img147/4185/70041273cy0.jpg

http://img396.imageshack.us/img396/4359/19244212vo2.jpg

http://img111.imageshack.us/img111/250/57293200px9.jpg

Chicken Patty

03-28-2009, 06:31 PM

em1r that looks amazing bro, great job!

langer, gotta love PCP&C dude :up: Rig looks awesome.

Worthy

03-28-2009, 07:33 PM

Hey people...

This is my first watercooled machine. I was always apprehensive about mixing water and electricity, but as time went by and by reading on some of these forums what you people were doing, I was finally sold on the idea.

I am currently running a corei7 920, Rampage 2 extreme, Crucial ballistix Tracer 6 gig in red, and 2 ATI 4870s in crossfire. I settled on the xigmatek fans in the end because I just like them. I have about 20 new fans laying around of different brands now...anyone looking for any? lolz

I am watercooling my NB and processor, but am making some final decisions on what to do with my GPUs since they do indeed need watercooling with the slot spacing of this board not facilitating the proper function of the air coolers.

I am currently using the FUFUFUFUFUFUFUFU 350AT waterblock and the Swiftech NB waterblock. I have a black ice 2 extreme 120.2 rad in the top of the case, and out back I went for the rx240 rad. I am using a danger den dual bay res, and a dd/laing 3.2 pump which IMO is pretty good. So far the system stays very cool and I am satisfied. I am also glad that I didn;t go with anyone else's canned "watercooling system".

Special thanks to petra's tech shop, danger den, and frozencpu.

Hope ya like it.