Actual size of rads

[zlojack]

I've been looking around trying to find an accurate measurement of the dimensions of the 3x120 rads.

Specifically, comparing the TC PA120.3 and the TFC Xchanger 360

I was able to see the PDF from TC's site which puts the PA120.3 at 430mm x 126mm x 64mm

Then I looked for the Feser measurement and I can only find 444x150x75, which can't be right.

Does anyone have both? Maybe get a size comparison going?

[Langer]

xChanger 360:
59.5mm thick, 127mm wide, 405mm long

[RedRaider]

So the FESER is thinner than my beloved ThermoChill...:hmm:

[Langer]

I triple checked with my calipers.

59.5934mm thick, 126.8521mm wide, ~404.8125mm long

[Langer]

The manufacturers spec is:
60.2mm thick, 125.6mm wide, 407mm long

[zlojack]

So the FESER is thinner than my beloved ThermoChill...:hmm:
I included the height of the inlet/outlet ports on the PA 120.3 in my dimensions posted above. On the TC spec sheet, the height of the rad is 59mm

So the Feser is shorter by about 20 mm.

[Langer]

I don't care what Red has to say... Feser makes a quality rad.

[zlojack]

I don't care what Red has to say... Feser makes a quality rad.
I'm looking to put 3 360 rads into a Pedestal with a custom bottom panel.

If the Feser is actually 2 cm shorter, it might be a better fit.