*NEW* - XSPC R120 Series Radiators

[RedRaider]

These appear to be a replacement for the RS Series of radiators.


XSPC R120-S (V)
High performance dual pass radiator designed for PC cooling.

- 2 rows of 12 tubes
- 1/4" Thread
- Chromed shroud
- Copper and Brass construction
- Dimensions: 172x136x45mm

Supplied with mounting screws

http://www.jab-tech.com/XSPC-R120-S-V-120mm-Radiator-with-top-mount-ports-pr-4230.html (http://www.jab-tech.com/XSPC-R120-S-V-120mm-Radiator-with-top-mount-ports-pr-4230.html)

http://farm3.static.flickr.com/2680/4429322522_598e01397a_o.jpg





XSPC R120-D (V)
High performance dual pass radiator designed for PC water cooling.

- 2 rows of 12 tubes
- 1/4" Thread
- Chromed shroud
- Copper and Brass construction
- Dimensions: 316x139x45mm

Supplied with mounting screws

http://www.jab-tech.com/XSPC-R120-D-V-Dual-120mm-Radiator-with-top-mount-ports-pr-4231.html (http://www.jab-tech.com/XSPC-R120-D-V-Dual-120mm-Radiator-with-top-mount-ports-pr-4231.html)

http://farm5.static.flickr.com/4008/4429322514_9dffff7b5f_o.jpg



XSPC R120-T (V)
High performance dual pass radiator designed for PC water cooling.

- 2 rows of 12 tubes
- 1/4" Thread
- Chromed shroud for 3x 120mm fans
- Copper and Brass construction
- Dimensions: 420x139x45mm

Supplied with mounting screws

http://www.jab-tech.com/XSPC-R120-T-V-Triple-120mm-Radiator-with-top-mount-ports-pr-4232.html (http://www.jab-tech.com/XSPC-R120-T-V-Triple-120mm-Radiator-with-top-mount-ports-pr-4232.html)


http://farm3.static.flickr.com/2712/4429322506_e0aa319610_o.jpg

[Space Pope]

Not to thread bash, but I think these have been out for a while.

It's good to have top ports on these rads... but if you wanted them to be on the bottom and used 90 degree bends, wouldn't that kill your flow?

[bigslappy]

Not to thread bash, but I think these have been out for a while.

It's good to have top ports on these rads... but if you wanted them to be on the bottom and used 90 degree bends, wouldn't that kill your flow?

Not if U use larger radius bends in your tubing !

the flow is making a sharp 90 degree turn with other rads that have the ports mounted flush with the fronts inside the rads themselves
soo i theory these will flow better IF the tubing is done right !


design your tubing & these will increase flow over all other standard rads

I like them !

[KaptCrunch]

yeah but use 45's or long swept elbows to neigate restriction

[spoidz]

I was just about to order XSPC RX 120 and 360. Should I look into these instead. I went RX after Martin and Skinnee's and HESmelaugh test results for 1450Rpm and below.

[Hondacity]

they ran out of paint....LOL

[Greedseed]

njahahaha it looks prity cheapass yeah xD

[Snyxxx]

Are these not Chinese POS radiators?

[vanarnam]

LOL hondacity i thought the same thing.

but you could always take some masking tape and cover the heat exchange portion then spray paint the chromed out part to whatever color you've wanted (w/o taking the paint and most of your epidermis off w/ methyl ethyl ketone). i've got some for a B&W build that are gloss white where there's chrome above...

[bundymania]

hahaha, shame on you Red, those rads are 6 years old and EOL since many years ! :D

or, if you know some german phrases from your stay here: Ab in die Ecke mit Dir und eine runde schämen du Schmock ! :D